Adirondack gliding chairs.

I think I've got the chair figured out. Patterns almost all made.

Will not say this was a fun project.

I cut this piece down because it starts to slope in the back.. you can clearly see t he ends, this will have to be changed.

Trying to see if I can get away with sone deck finish from S&W and add color and protect the wood sone.

Trying a larger spot on the bottom arm rest.

After two coats I see no residue coming off the chairs. Not sure if the results would have been the same with linseed oil.

In case Rebel thinks Imwent searching for this, an old school chum nicknamed me Yoda and constantly sends me stuff. Might be the only thing we have in common 😁

I took and sat it in the sun to see how the stain woukd look. I think I'll use it when time comes..

Looks very similar to the set I designed for Rockler Woodworking 12 years ago. It was a set of 4 construction plans for a single-glider, double-glider, single-fixed, and double fixed. It was a fun project. I did them all in SolidWorks so I could even play around with the pivot points for different glider motions (you asked about that in one of your previous posts). They built several of the models for photography, and I made them give me one of the double gliders as partial payment, because my bill was too hard for them to swallow. 😱

If you're interested, I could send you the PDF plans.