Woodworking Talk banner
work bench
1-5 of 5 Results
  1. Joinery
    Hi all, I'm building my first proper workbench with a thick laminated top and am racking my brain on how to incorporate my massive vise rather than to buy/make one for the table. I want the vise jaws to be flush with the tabletop, meaning the vise has to be seated under it rather than on it...
  2. Project Showcase
    The Entry Level Workbench shown here is a collaboration between myself and Kevin at Kev's Woodworks. I’ve detailed the design while Kevin and his son built the workbench as a father/son project. All details including dimensions, parts list, tool list, and a full cost breakdown are included in...
  3. General Woodworking Discussion
    Hi everyone, I'm new to the forum and a relatively low-skilled woodworker. I need a workbench and have two Ikea oak laminated table tops (31"x49"x1.25") that I'm considering using as a top for the workbench. However, I have no idea whether this will work and I need some advice! I have had the...
  4. Project Showcase
    WorkBench I built a new workbench over the summer and I think it turned out pretty nice. I made the table out of pine. For the top I used a solid core door and then placed a 1/4" hardboard on top of it. For the assembly I primarily used glue and screws, but I also used some pocket hole...
  5. Tips, Tricks, & Homemade Jigs
    I have been building homes and doing finish carpentry for more than 20 years using various work benches. My business slowed down considerably in the past couple of years so I took advantage of my down time and worked on a better bench design than I had been using. It is big, light, and very...
1-5 of 5 Results
Top