Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 102 Results
  1. Power Tools & Machinery
    Hello, I found this Powermatic Wood Planner Model 100 for auction where i work at. Its been listed for about 4 days now with 2 bids. since its a low bid for this long it shouldn't go up that much higher. Would this be worth it? whats the highest bid i should go if anything and if anything...
  2. Milled back to life “old growth” lumber

    Finished project : kiln dried/sterilized milled t&g v-grooved flooring. carefully removed lumber from an early American cabin/granary as it sat firstly built in 1650.floors feature raised inlays and borders Btw 1” and 1-1/4” thick t&g with a heavy v-groove. this timber was left in its natural...
  3. Wood Carving
    This was a scrap of walnut, then I lathed it round, tried some lines, sanded from 80-220, ended with this, any suggestions about finishing or just stay unfinished Thanks for the help
  4. Dust Collection
    I'm a novice woodworker and I've recently acquired a lot of power tools. My one issue is the sawdust. I know there are dust extractors but it is confusing how many different brands and prices are available. I have a variety of corded and battery-powered machines, the majority of which are Dewalt...
  5. Wood Finishing
    Anyone have suggestions on what is the best finish for copper inlay? I plan to create a thin line of copper powder inlay along the curved lines of the design on my cuttingboard as displayed in my post? Any suggestions or advice are most welcome. Thanks!
  6. New Member Introductions
    Hi guys, I've just used my homemade scraper made from a hack saw blade which was not good anymore. I found it easier to scrape the existing finish off a curved drawer edge instead of sanding. I hope this will help someone else, as I don't really like sanding which is messy too. This is the...
1-8 of 102 Results
Top