Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. General Woodworking Discussion
    Hi: For the purposes of simplification, if not explanation, I am gluing a plastic sheet-similar to a plastic table cloth to plywood. Before beginning this project I tested that using wood glue to bond the two surfaces would work well and it did. Again, without going into details, I have need...
  2. Joinery
    Building a bookshelf with 3/4 inch plywood (AC pine). The bottom of it is a piece of 2x12 I had tying around. I was going to screw the sides into the bottom piece with wood glue. And I was going to use finishing nails and wood glue on the top shelf (and maybe reinforce it with something to...
1-2 of 2 Results