Woodworking Talk banner
wiring
1-5 of 5 Results
  1. Power Tools & Machinery
    Hello, this is my first post, thank you for having me. Looking forward to contributing and learning. I recently started the wiring of an older Unisaw and have run into an issue with the switch. I cant seem to make head or tails of it but, in the end need to get it wired. Any help would be...
  2. Power Tools & Machinery
    Hi, I am new to the forum and woodworking. I recently acquired Powermatic Model 60 jointer, I think it's from 1983. Previous owner had an issue with it, from his words, jointer would start but then pop the breaker. So, he messed with wiring and bypassed the magnetic starter - that didn't help...
  3. Dust Collection
    Long time lurker, first time poster! Great forum here! OK - So I have fabricated my own cyclone-style collection system and have it hooked to a 5 (peak) HP Shop-Vac. I have some of my collection lines run to my equipment (Chop saw, table saw, and planner) and will eventully add a few lines for...
  4. Power Tools & Machinery
    I have a new Jet Pro Shop 10" table saw. I have oly made a few cuts of 1/4 ply and the overload switch (red button) kept tripping. After talking with Jet Support theysent me a new switch and advised me to switch over to 220V. Ive made all the wiring changes on the motor as per the diagram in the...
  5. Power Tools & Machinery
    I recently acquired an older (1985) Makita 2030N combo planer and jointer. Looks like a great machine but I need some help on replacing the current switch. Motor is good, replaced the carbon brushes, cleaned the commutator, but I am trying to replace the original switch which doesn't work with...
1-5 of 5 Results
Top