Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Wood Finishing
    Hello everyone, I have been building a board game out of walnut burl and the game is in the shape of a box which you can see in the picture below. There is an ivory inlay on the top and bottom of the box in the channels which you can also see in the picture. I do not want to do a high gloss...
  2. General Woodworking Discussion
    Hi there guys. So I am planning on making an Armoire, in the style of the attached picture, for my bedroom. I have all the plans already drawn up and the cutlist laid out. However, I am having trouble deciding what types of hardwood to choose for this project, in order to achieve the same...
  3. General Woodworking Discussion
    Hi guys, So I have started a proper thread now (some of you might have seen this post selfishly taking up space on another) still in a bid to find out what kind of wood this table is made from. I have even been to look at places selling vintage/antique furniture and I can't find anything like...
  4. Wood Finishing
    I'm from London UK and am finding the veneer softener difficult to source. I've found a formula online which is as follows; 1 gallon of water 8 Oz of glycerin 8 Oz of Methalated spirits (denatured alcohol) Will there be any side effects using this formula..? Walnut burr is really expensive haha
  5. Wood Finishing
    Hi I'm new to this site but have a question; I have recently bought some beautiful walnut burl veneer ( 0.6mm thick) and am using cold press method and "Tightbond professional strength veneer adhesive" The problem I am having when doing test runs is after the adhesive has cured and I take clamps...
1-5 of 5 Results