Woodworking Talk banner
tail stock
1-2 of 2 Results
  1. Woodturning
    I have an old Rockwell 46-111 wood lathe. The tail stock does not have a center punch hole to remove the dead center. I have been told to turn the sleeve all the way back and the threaded bolt should push out the dead center. However, there is about a 1/2" gap between the back of the dead...
  2. Woodturning
    I could really use some help. I am new to wood turning and have an old Sears lathe I am trying to learn on. It has a #1 Morse taper. The cup center is firmly stuck in the tail stock spindle. I have removed the spindle from the tail stock and soaked it in Liquid Wrench for over a week, but it...
1-2 of 2 Results
Top