Woodworking Talk banner
table design
1-15 of 15 Results
  1. General Woodworking Discussion
    Good Evening woodworking friends. I created my first tabletop panel and did not think ahead on how to ensure it stays flat over the years. The lumber I used was 4/4 Brazilian cherry and maple. The dimensions are approximately 8ft x 4ft and I plan to just use hairpin legs to keep it simple. I’m...
  2. Design & Plans
    Hey there! I'll be renovating my home office this year and since I just got into woodworking I'd like to make myself a nice table with storage. I'm a beginner so I don't really know if this design would hold up and I'd be happy if you'd give your honest opinions and advice. Probably I'll make...
  3. General Woodworking Discussion
    Hi everyone! I just recently received a promising inquiry from a restaurant wanting a big quantity of table tops made with an epoxy layer surface. I've never made restaurant style tables or worked with epoxy but the offer is too good to pass up. I need some advice on how to properly build the...
  4. Design & Plans
    Hey guys, The wife and I were out looking at a few open houses and came across this table that my wife HAD TO HAVE!!! So I snapped a few pictures, thinking she would forget about it in 2 minutes, and we moved on. Well she wants me to build it, and I didn't look at the underside and am concerned...
  5. Design & Plans
    Hey folks. I was hoping to get some feedback on the attached plans I created for a very large counter-height craft table. I'm new to woodworking (about 2 years messing around with projects in my spare time), and really hoping that what I've designed is structurally sound. I welcome any and all...
  6. Design & Plans
    I have chosen to make my first project ever but would like so advice. I am trying to build a gaming table for the house. I will try to explain the idea as best I can. So this table is going to be used for playing really large board games(not monoply, things like Arkham Horror and Firefly) so it...
  7. General Woodworking Discussion
    I want to make this table! I am a journeyman woodworker with access to most homeowner/diy tools. I can source the rough cut planks. After reading and watching many youtube videos, I am still not 100% sure how to go about making this beauty. I have a few specific questions lingering... 1...
  8. Design & Plans
    I want to build a "Z" shaped end table where the top and bottom on the "Z" are the tables top and bottom. I need suggestions on how to join the angled middle board to the other two boards that will be strong enough to hold weight on top. Im planning on using 2" thick walnut. If a plan for...
  9. Joinery
    Hi, I am making a long conference table that will divide into 3 sections, which can each be used as separate tables. I have two questions. Firstly can you recommend a good reliable system for connecting the tables? It needs to be something that holds them together in place, but can be...
  10. Design & Plans
    I'm trying to attach a table top to a trestle style base and I'm trying to figure out the best way to attach it. The table is made from Kiln Dried Doug Fir, so the top is 1.5" thick and the base is made up of 4x4's. Here's what it looks like...
  11. Design & Plans
    I am in the process of starting to develop a design for constructing a table that will hold snacks, and separate drawer for pens and note pads and also have a nesting table under it. I am thinking for the snacks a enclosed rectangle box that has a lift drawer front and a sliding bottom inside...
  12. Design & Plans
    I saw this very interesting table on urbanoutfitters.com (http://www.urbanoutfitters.com/urban/catalog/productdetail.jsp?id=26937375&cm_mmc=CJ-_-Affiliates-_-Polyvore-_-11292048) and I wanted to make it on my own. Is there a name to this shape ? Thank you! :thumbsup:
  13. Design & Plans
    So I thought it was going to be all sooooo easy and now I am wigging out. I am building a very wide table 45" (and a bit) x96", yeah I am getting ready to invite the whole neighbourhood for thanksgiving this year. I am using 8/4" x 2" x 8" rough hewn white pine to get rustic look to it. I...
  14. General Woodworking Discussion
    I'm a relative newbie on this. earlier this year I built a dining table for my daughter. I stained/varnished 2x8 birch planks from HD, and used 3 cross braces that were 1x3's. I then attached ikea legs. Overall I was reallypleased with it, and she think I'm dad of the year. It looked good...
  15. Design & Plans
    Hi Folks Hey, I’m new to this forum and new to woodworking so please indulge my newbieness and questionable questions. I’m in the process of building a table in a woodshop adult class I’m taking. It’s at a local high school and they have all the tools and machinery I’ll need for my project...
1-15 of 15 Results
Top