Woodworking Talk banner
shed
1-6 of 7 Results
  1. Design & Plans
    Hi Everyone, Would appreciate your advice on my situation. My home doesn't have a basement or garage but it does have a large backyard with two sheds. One shed is about 14x8 with an 8ft ceiling, the other is slightly smaller. The larger shed is most likely not large enough for any serious...
  2. Woodworking Videos
    Hi all! Finally it is time to build my new workshop. It will be about 11 x 17ft in size. First i need to break down a old shed. here i will build the new bigger one. I will try to reuse as much as possible to keep costs down a bit. The framing will be made out of cls wood. The siding will be...
  3. Project Showcase
    Build Instructions: http://www.instructables.com/id/Shelves-for-a-Shed/ I looked at purchasing brackets but I couldn’t get the exact size and the price seemed high for something so simple – plus I had a few excess 2x4s from the last job. Mainly, I wanted to utilize the area in the upper portion...
  4. Design & Plans
    How do I seal/fill the space/gap created where the plywood sheets I have used to side my shed meet? I have built a 16’x8’x8’ shed sided with ½” plywood siding. Initially, I intended siding it with cedar planks. Consequently, I did not put any weather strips between the plywood sheets where...
  5. Design & Plans
    I am building a 12' wide by 14' deep lean to shed. It will be installed on a sloped area and will be about 1 foot off the ground at the high side and 2' or so at the low side. I am new to all of this so this is a great task for me and my family. 1) How many piers do I need to pour and their...
  6. Design & Plans
    Hi, I'm very new to woodworking and new to the forums here. I'm about to start building a workshop this summer and i'm afraid of not having enough room for all my tools. I'm not creating a workshop for a business or even a side job. Woodworking is a hobby i enjoy and recently picked up...
1-6 of 7 Results
Top