Woodworking Talk banner
saw blades
1-4 of 4 Results
  1. General Woodworking Discussion
    I have just made a 12" wooden Bow Saw and the blade I bought is 3/4" wide and needs too much tension on the twine to achieve a nice taught blade. I have searched the web for a narrower blade, around 3/8" but cannot find one as most blades on offer seem to be very wide aggressive blades for tree...
  2. General Woodworking Discussion
    I need to replace a standard 0.125" blade on my Grizzly 1023R that uses a rving knife. Grizzly says that the knive requires you to use a standard kerf blade as the thin kerf ones are thinner than the knife and they don't make one to match. I really would like to use the thin kerf ( 0.0904")...
  3. Power Tools & Machinery
    This is my first post. So be gently. I am looking for the best 12" blade 1" arbor for cutting mortison in stiles for my kitchen cabinets. I would like to use my table saw for cutting the rail and stiles joints (missoin style). But in my local hardware shops the selection of 12" blades are...
  4. Power Tools & Machinery
    Hi, Does anyone have trouble here with dull saw blades, or achieving chip-free cuts? I found this article today full of tips from manufacturers. Techniques included sharpening as soon as blade deterioration is visible, and consistently performing preventative blade maintenance. Do you have...
1-4 of 4 Results
Top