Woodworking Talk banner
rockwell/delta
1-4 of 4 Results
  1. Woodturning
    I recently purchased a Rockwell/Delta 46-450 wood lathe with the indexing feature in the head and spindle. The machine came without the indexing pin and lever that engage the indexer into the spindle pulley. I can machine new parts if I knew what they looked like. In the Delta exploded parts...
  2. Power Tools & Machinery
    I'm restoring a floor model Rockwell drill press model 1124 (pretty sure its almost identical to the 15-081, but im not sure, cant find a manual for it). Before I get started, I'd like to get an idea of what I'll need to order so I'll have it ready to go. Below is a picture of the chuck. Its...
  3. Power Tools & Machinery
    I'm back in the wood lathe hobby since my kids are grown and I actually have time. Someone just gave me a beautiful old Homecraft by Delta wood lathe. The tail stock tightening screw mechanism is stripped and so I am writing you smart people to tell me where I could purchase the entire tail...
  4. Woodturning
    I have an old Rockwell 46-111 wood lathe. The tail stock does not have a center punch hole to remove the dead center. I have been told to turn the sleeve all the way back and the threaded bolt should push out the dead center. However, there is about a 1/2" gap between the back of the dead...
1-4 of 4 Results
Top