Woodworking Talk banner

rockwell

  1. Power Tools & Machinery
    I'm restoring a floor model Rockwell drill press model 1124 which i am pretty sure its almost identical to the 15-081. This was a barnyard machine. Covered in grime and rust, and not taken care of well, at all. The table was broken and bolted to a janky weld up job, among other half-a**...
  2. Woodturning
    Greetings all. As I continue to restore this Rockwell/Delta 46-450 lathe I am now wondering if there is a sleeve or bushing missing from the tool rest base? As seen in the photo, the base has an odd shaped multi-angled hole for the tool rest shaft to rest in, yet the shaft is perfectly round...
  3. Power Tools & Machinery
    I'm restoring a floor model Rockwell drill press model 1124 (pretty sure its almost identical to the 15-081, but im not sure, cant find a manual for it). Before I get started, I'd like to get an idea of what I'll need to order so I'll have it ready to go. Below is a picture of the chuck. Its...
  4. Power Tools & Machinery
    Hello: I just purchased this beauty, but I have trouble identifying the Rockwell model #. It is a 16" scrollsaw, single speed, motor mounted on base of stand. Here are some pics https://www.dropbox.com/sh/lrqc74iqtfu2ylh/AABs5QjmLU4-ClON8Iti-b7pa?dl=0 Thanks!
  5. Power Tools & Machinery
    Hi Guys, I have my dads only 1957 ish era delta rockwell 14in band saw. its in great shape. The bearing right behind the blade has gotten old and is locked up. I am having issues finding a replacement for it. I've uploaded a picture of the bearing in question. On the bearing itself it...
  6. New Member Introductions
    Hi, I'm new here, and am hoping someone can give me some help. My Father in law passed away, and one of the things he left me was his very old table saw. It is small and works fine and served him well for many many years, but is missing the miter gauge. After going through everything in the...
  7. Power Tools & Machinery
    I just got an old Rockwell tablesaw hand-me-down from my grandpa. I think it's from the 70's. It looks to be in good shape, but I was told that the motor/belt might nee to be adjusted. It does indeed. When it on the motor bounces at first then settles into a violent vibration. I'm obviously not...
  8. Woodturning
    I have an old Rockwell 46-111 wood lathe. The tail stock does not have a center punch hole to remove the dead center. I have been told to turn the sleeve all the way back and the threaded bolt should push out the dead center. However, there is about a 1/2" gap between the back of the dead...
  9. Power Tools & Machinery
    I have an old Rockwell planer 18"x6" model # 22-201. I am looking for part # 93 which is a cast iron support. Is there a place that deals in old parts or someone who may have old parts sitting around? I would like any information you can give me! Thanks!!
  10. Power Tools & Machinery
    I have a 35+ year old Rockwell 13" planer, model 22-401, that has decided that it doesn't want to feed hardwoods. It feeds softwood just fine. The machine wasn't new when I got it back in the 70's but it was and is in good shape. I've run quite a bit of wood (both hard and soft) through it...
Top