Woodworking Talk banner
problem
1-7 of 7 Results
  1. Power Tools & Machinery
    Hi, I figured this might be a good place to ask about my thickness planer. I'm starting a business with my brother and we've been chasing this issue for months now, it's preventing us from actually starting to work, since it completely ruins the piece... The problem we're chasing is a random...
  2. Power Tools & Machinery
    Hi, My Dewalt 735 planer started making a "thumping" sound. I took off the various covers and found the feed roller chain is skipping and causing the sound. I'm not an expert at this planer since I recently purchased it so I'm not entirely sure what may be causing the problem. I removed the...
  3. Power Tools & Machinery
    I got my Dad's old Craftsman 6" Jointer and have a problem I hope you can help with. The knives are good and sharp and whatever I joint, works great until I get to the last inch or so of the piece. The jointer then takes an extra 1/16" of wood from what I am plaining. I have made sure I am...
  4. Power Tools & Machinery
    The motor assembly on my Craftsman table saw won't adjust to a 90 degree angle. The closest I can get is about 89 degrees but that is after jamming it as far as possible on the negative side of zero. Is there something I can do to adjust it? Or should I use my Sears warranty?
  5. General Woodworking Discussion
    Today I cut down the largest burl I have ever seen in real life. The picture attached will show you how huge it is. The board in the pic is 4.5'X6" just to give you a reference. an inch or two of the outside is rotten but the inside is very solid. But I wasn't thinking and I brought it down into...
  6. Woodturning
    Hey guys, I have been trying to make a nice little vase made of maple for a while now and have managed to rough it down to a cylinder. however when I try and shape the vase every tool that I use will hardly cut the wood, just shave dust of the project then all of a sudden dig in and take a...
  7. Woodturning
    Hey everyone, i'm back into woodworking after a long time away from it. I have made several nice pieces of furniture, nothing too special, and i'm working on a dining room table now. I am turning the legs myself on my lathe, a pretty old craftsman 36" I plan on making the legs about 32" and...
1-7 of 7 Results
Top