Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Wood Finishing
    I need some advice! I built a farmhouse table with a walnut top. Finished it with 2 coats of Danish oil, let it sit for 4 days. Between each coat of Danish oil I wiped off excess immediately. After 4 days the surface felt dry and smooth (not tacky). I then added one coat of water base...
  2. Wood Finishing
    Here's my problem: I have a slight gritty texture in my PU finish. Here's my process; -Imron PU primer with 40% catalyst and 15-20% reducer(butyl-acetate) depending on daytime temps. 1 coat. -let dry 4 hours then buff smooth with 220 pneumatic buffer. -blow off dust and debris in spray booth...
1-2 of 2 Results
Top