Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. General Woodworking Discussion
    I have several pieces of 2x6 lumber that were used as cross-members in a big hobby table. They spanned the inside of the table frame, nailed from the outside. The table has long since been dismantled leaving 2 inch nail holes in the ends of the wood. Now I would like to build a new table...
  2. General Woodworking Discussion
    Hi: For the purposes of simplification, if not explanation, I am gluing a plastic sheet-similar to a plastic table cloth to plywood. Before beginning this project I tested that using wood glue to bond the two surfaces would work well and it did. Again, without going into details, I have need...
  3. General Woodworking Discussion
    Beginner here - moved into home with sign post in front. I want to restore and stain a natural color. Post is made of PT lumber and secured in soil, not concrete. Was told the post needs holes in it to breathe because it is absorbing moisture from ground. It has holes in it. Can I fill...
1-3 of 3 Results