Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Wood Finishing
    Hi, I am not a woodworking professional, however I have a question about an oil stain on an antique table. This table had an olive oil spill, now a prominent stain about 2 inches diameter, and has been there for a long time before discovered. What, if anything can be done remove it, and/or make...
  2. Wood Finishing
    Hello All. Noobie357 here, and as you may have guessed... I'm new. I have a quick question about epoxy. My wife has a new island top that she stained with oil-based stain. I did a bit of research since she wanted that bar-top look in the end. I found a thread in this forum from 2014 stating...
  3. Wood Finishing
    I'm a bit of a clumsy rookie and can use some advice. Every couple of years I refinish a piece of furniture that has one too may ring marks created or nail polish spilled on. Typically I sand, stain and add two coats of polyurethane. It's the 2nd coat that does me in because from looking really...
  4. Wood Finishing
    I have hard maple cabinets, replacing with new doors and staining, trying to get a dark, deep cherry/mahagony look. I have had a heck of a time getting even staining on hard maple. Per the company I had manufacture the doors, they said the use a pre-conditioner, followed by gel stain. The...
  5. Wood Finishing
    Hello, I need some ideas/ advice here please... Stained oak plywood with Varathane oil stain traditional pecan 118, as I have had good results in the past over the years. This batch of plywood gave me some really splotchy results, and I don't know why. No, was careful with the glue, but it...
1-5 of 5 Results
Top