Woodworking Talk banner
motor trouble
1-3 of 3 Results
  1. Power Tools & Machinery
    I've had occasional intermittent trouble with 240 circuit breakers tripping since I got my Powermatic 65 tablesaw. Yesterday I couldn't get my bandsaw to start up. Replaced the breakers and no better result. Unplugged the tablesaw and the bandsaw was fine. Plugged the tablesaw in and the...
  2. Power Tools & Machinery
    I picked up a Craftsman 113.29943 10" table saw a few days ago and am cleaning it up and such. All of a sudden today the motor just hummed with out spinning the blade. I removed the belt -no spin, just hum. I had the capacitor checked and it is good. A couple days ago I rotated the motor in...
  3. Power Tools & Machinery
    Just Got A Table saw, Delta shop master TS200LS, When I turned saw power on,it is very sluggish to get gowing and lots of grinding noise. I attempted to cut and the blade stoped. I changed from a 15 amp to a 20 amp braker thinking the saw was not getting enough power. Saw runs not as sluggish...
1-3 of 3 Results
Top