Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General Woodworking Discussion
    Hi everyone, I'm studying a posible project were we would need to glue 4mm mirrors to wood. Dimensions vary from 600x600 mm to 2500x1200 mm (4 and 31 kg each aprox). We usually apply Den Braven High Tack between aluminum profiles and mirror glass in order to hang them with screws at the back...
  2. Woodworking Videos
    Just finished building this custom mirror for my guest bathroom. First of many upgrades to my home! I made a video of how I built the mirror if you’re interested. If you have any comments or suggestions about the build please comment below. I’m interested in the input!
  3. Hand Tools
    I've collected a couple combination squares, and a try square and have several framing squares and also a speed square. I'm not sure that I truly trust any one of them. Can't afford a Starrett! I've done the usual test where you use a factory edge on a sheet of plywood and then mark a line...
  4. General Woodworking Discussion
    I need to glue a 1/4-inch oak plywood to the back of a mirror (bathroom cabinet, made from 3/4-inch red oak). I do not want to damage the silver backing on the mirror by using the wrong glue. There are hundreds of glues out there, and of course they all claim to be the best. But what glue is the...
1-4 of 4 Results
Top