Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Wood Finishing
    HI, First coat of linseed went fine, waited 10 days before second coat on hickory. Second coat is tacky 4 days later. Project is indoors, airconditioned humidity controlled placed, 70F and 45% humidity, reading off AC panel. Same brand oil, same bottle, kept bottle tightly shut and squeezed...
  2. Wood Finishing
    I am planning on coating a beech, butcher block counter with Spar Urethane to give it some moisture protection. The counter has been oiled already with a linseed oil based, food-safe oil. Should I do anything to the surface such as wipe it down with thinner to achieve better adhesion when I...
  3. Wood Finishing
    I have several carved spoons and a couple of bowls to finish and I wanted to use an oil/wax combination. Has anyone used raw linseed oil with beeswax or paraffin wax? I’m aware of the mineral oil/beeswax formula but mineral oil never dries and I’d rather have something fully cured. Will the...
1-3 of 3 Results
Top