Introduction This thread is about kitchen design concepts and ideas, NOT woodworking. If you are looking for something related to basic woodworking, stop here. I freely admit that we paid a contractor to do the installation work. For that, I apologize for posting photos of work that I did not...

Hi all, I am an amateur carpenter and have just installed my first kitchen cabinets. The build was near perfectly square before moving the cabinet into position. After moving the cabinet into position, I noticed that the bottom shelves were not fitting correctly anymore. A few of the shelves are...

I recently got a hard maple table top that I am going to build a kitchen table with. I am looking for opinions on how to correctly finish this unfinished wood. I would like to have it be as close to a natural color as possible, with maybe the slightest light brown color. I do not want it to be...

For our kitchen remodel, with natural fir flooring and maple cabinets, we're adding a set of six small open shelves for dishes and cups (24" x 12" and somewhat thick, maybe 6/4 or 8/4?). I haven't done this before. Maple would be solid...but heavy? I was told Douglas fir would warp, but someone...

I have not been working in the shop because I just moved, so I have been pretty busy and haven't really had a shop to work in. Well now that I am settled in, this summer I plan on making a dining table made of all walnut. I created the plan in sketchup, so it should be fairly simple to show...

Hey guys. Since I do not plan on being in my current home for much more than 5 years, I've decided to shore up and reface my current kitchen cabinets. I've rebuild all drawer boxes and am about half way finished with the doors and drawer fronts. I'm looking for a good place to purchase quality...

I am installing new kitchen cabinets and my wife wanted a corner cabinet installed right next to the under cabinet microwave. The issue now is that the door to the cabinet will only open 45 degrees. Does anyone know of a hinge that would extend out from the frame about 4 inches and then swing...

Hi, I am looking for someone to critique my design for a kitchen island. I am fairly new to woodworking and was trying to create something that would be simple to build. I attached a zip file with the SketchUp drawing so hopefully someone can provide feedback and advice on this before i get...

As part of my job I am given the task of altering cabinetry. In this project the client had a standard refrigerator that was set underneath a 12" upper cabinet that had a 12" end panel. I have no idea why the cabinet above the fridge was only 12" deep to begin with but anyway the client wanted a...

Hai Everybody, Kindly let me know any software which will give me the panel cutting list for a cabinet. i also want to develop a similar software , is there a huge demand for that . What price is there in the market - only for cutting list generation feature thanks in advance Praveen

Hi, Amateur here looking for any advice or suggestions. My project is building shelving for a walk-in kitchen pantry. The interior dimensions are rectangular, 6’ W X 38” D. Material: ¾" cabinet grade Birch plywood for shelves and sides / dividers. 1" x 2" Poplar for back shelf support...