Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. General Woodworking Discussion
    I've got a 75 lb slab of Brazilian Cherry that I've surface planed and I'm trying to figure out the easiest way to square the 4 edges. While I do have a table saw, it's a jobsite and it really hard to hold onto this 4x8 slab and push it through. Could I square up the edges with just a track...
  2. General Woodworking Discussion
    I recently purchased an 8" jointer and I'm noticing that, after face jointing a few boards, that there are gaps on either side when putting the faces together. These are small gaps but visible nonetheless. I know that the opposite of this problem (gap in the middle of the board) means you're...
  3. Tips, Tricks, & Homemade Jigs
    Hi everyone. Since I don't have a jointer I'm planning on doing my jointing with my planer with a combination of a planer sled and some shims to raise up the high points. Here's an example video demonstrating the technique: Planing Jig - How to Use Your Planer to Joint Wood | Woodworking Jig -...
  4. General Woodworking Discussion
    This is multi jig for table saw can use for Tapering, jointing, make circle and table sled, 4 in 1 function on 1 jig very usefull and safe storage for organize because can knock down for all part. I made this from HMR material coz very flat material, solid and durable (waterprof). Very safe...
  5. Tool Reviews
    Got to use the new I Box yesterday. It only took me 3 hours to set it up correctly. The joys of a Shopsmith! And, the agony of being as mechanically inclined as an aardvark. The set up and use CD that accompanies the I Box was/is extremely helpful. The fit and finish of all the parts is...
  6. Joinery
    Anyone else hollow-joint? I was taught to raise the far table of the jointer a hair, which would produce a hollow in the edge, which, when doubled with its mating board done the same way, allows a crack of light through in the middle when held up together. The reason for this is to build-in some...
1-6 of 6 Results
Top