Woodworking Talk banner
hvlp
1-4 of 4 Results
  1. Wood Finishing
    I often use waterbased almost lacquer like finishes from General Finishes to seal up cabinet repairs and touch ups and over faux finishes but recently bid on clear coating some all ready installed very fine expensive kitchen cabinets which were stained but not cleared several years ago. I was...
  2. Wood Finishing
    I just bought a FUJI minimite 4 stage turbine and i am having trouble with spraying BM Advance. I have tried thinning up to 20% but i still have large particle splattering overspray. I have tried nozzle sizes from 1.3mm to 2.0mm. the viscosity is really high. passing through the #4 (@20%...
  3. Wood Finishing
    Hi Guys, So I've been working on a sprayed lacquer project for a few weeks now. I'm on the finish and, I'm working through some issues. I've done a ton of research and I have a good handle on just about every aspect of the system except I don't FULLY understand how to calculate my required...
  4. Wood Finishing
    Hi all, thanks in advance for your insight! I have seen some similar posts on this topic but nothing for a few months so thought I would restart with a clear title. I’m going to be doing an increased qty of furniture finishing, including stand alone pieces, cabinets, built-ins, etc., (mostly...
1-4 of 4 Results
Top