Woodworking Talk banner
gluing
1-5 of 5 Results
  1. Joinery
    People, I am trying to find a way to glue these two pieces of wood together to make a small table. But as you can see the bottom log is holed from its top (it used to be for small candles). I am not experienced in wood working and I am hoping not to cut big parts of the log (if possible)...
  2. General Woodworking Discussion
    I have to glue down an L-shaped "bullnose" across a wide, wood-floored, concrete step tomorrow morning. I don't have a choice in the matter - it is already there, and the bullnose is partially pulled up. The bullnose was originally tacked down with small finish nails, but the nails could only...
  3. General Woodworking Discussion
    This may seem like a dumb question but I am trying to work on my sanding principles when it comes to woodworking. I am gluing two 2x4 pieces of wood, fresh from the lumberyard, together. Is this the kind of thing that I should be sanding before I glue? They seem like a perfect shape and size at...
  4. General Woodworking Discussion
    Hi there! I have a very newbie question... I need to glue together two sheets of aircraft birch. The birch is very thin - 1mm - and 3-ply (vertical grain/horizontal grain/vertical grain). My question is: do I need to glue the sheets cross grain (vg/hg/vg+hg/vg/hg)? Or can I just glue them...
  5. Joinery
    I am looking for an adhesive to set pvc on plywood. I am trying to watertight a deck by gluing pvc liner on, and cover it with any type of light flooring. I have two questions: How bad is the idea of using pvc liner for exterior application? and Is epoxy a good option to glue the liner to plywood???
1-5 of 5 Results
Top