Woodworking Talk banner
floating shelf
1-3 of 3 Results
  1. Design & Plans
    Hello! I’m hanging a large floating shelf over my TV using threaded rod for my brackets. I ordered some 1/2” diameter rod the other day assuming that I’d be working with 1” thick material but the best I could find at the hardware store was an edge glued oak panel only 3/4” thick. (I don’t have...
  2. Design & Plans
    Hello everyone, I'm going to be building a little floating table top/shelf, rectangular in shape (29" wide x 18.75" deep). It needs to be attached to drywall/thin metal studs. So far, my thoughts were to attach 2x4's to each corner of the wall for support. As far as attaching the 2x4's to the...
  3. Project Showcase
    I made this set of floating shelves for a client that had seen some of my previous live edge work. So i made my way to the local sawyer to pick up these black gum slabs. I also mimicked the live edge on the ends of the boards by cutting them irregular, then shaping them with a grinder. If you...
1-3 of 3 Results
Top