Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 6 Results
  1. Design & Plans
    Hello, I am preparing to begin utilizing CAD in my small finish carpentry/cabinetry business. Customers are requesting digital drawings more and more often. Can you recommend programs that will be most useful for a beginner CAD user to assist with kitchen/bath, built ins, etc and also will...
  2. Tips, Tricks, & Homemade Jigs
    I have been building homes and doing finish carpentry for more than 20 years using various work benches. My business slowed down considerably in the past couple of years so I took advantage of my down time and worked on a better bench design than I had been using. It is big, light, and very...
  3. Wood Finishing
    I am going to put a round over edge to a 4/4 board. what size router bit do I use? nevermind. I had a bonafide brain fart. the answer was right in front of me.:blink:
  4. Wood Finishing
    has anyone worked with 1/2inch thick zebra wood? I am new to using zebra wood.I am making a jewelry box and need advice on matching putty and attaching the face panel. glue and clamps ? (rest of panels assembled with 3/4 in. 18 gauge brads) would like to have to not putty in the face panel. I am...
  5. Trim Carpentry & Built-Ins
    Am trying to come up with a way to make a pattern of the horizontal wall logs of my house, as they meet the drywall of the inside walls, so I can cut molding to coutour and block out light and noise from the next room. Have 9' ceilings, so pattern can be made in 2/3 sections, but can't think...
1-5 of 6 Results