Woodworking Talk banner
epoxy resin
1-3 of 3 Results
  1. Wood Finishing
    Hi all, new member here looking to draw on some experience. I'm currently working on my first resin project - an end-grain sycamore serving platter. I did the first side in two halves as I wasn't sure my masking would contain the resin and wanted to limit mess and waste. I'm using German...
  2. Design & Plans
    I've got a piece of wood here with a few cracks in it and I'm trying to think of what to make with it. It's about 60mm across and 200mm long. Rhodedendron and I've never turned it before but it roughed out just fine. I left most of the bark on it. Just needed to shave it down a bit to fit it...
  3. Wood Finishing
    Greetings. I am finishing a slab of poplar wood. After applying two seal coats of 2 part epoxy resin, I am left with a few "dry" spots. The rest of the slab has sealed nicely. I am confident I was able to apply enough epoxy to seal the spots. After leveling and sanding clean with 220...
1-3 of 3 Results
Top