Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Design & Plans
    Hi! I am upgrading my shop from a 1 car garage to a dedicated shop that will be 25' x 25'. I recently acquired a Laguna P Flux 1 https://860860.app.netsuite.com/core/media/media.nl?id=2330902&c=860860&h=cd39892c7cb5220f58d9&_xt=.pdf (1.5hp, 18.8Amp, 1314CFM at 6" inlet per Laguna) and was hoping...
  2. Dust Collection
    I am in the design phase of ductwork planning and have a question or two for the forum. General info: - The collector is the PennState Tempest 1535 w/ 7" inlet. The machine is rated at 1700 CFM through the collector. I will be using the 7" - 6" reducer that is supplied with the machine...
  3. Dust Collection
    I have been reading all the confusing discussions on dust collection piping designs. I understand that having the larger 5 or 6" ports would be optimum but most of my tools are 4" and are not easily modified. My 18" drum sander being the main collection problem. I am purchasing a 3hp cyclone to...
1-3 of 3 Results