Woodworking Talk banner
drawers
1-9 of 9 Results
  1. Design & Plans
    Hi! I'm curious what people's thoughts are on organization systems they've used for their shop. Some general questions I have: Do you have a successful organization system/what makes it good? Do you lose things often? Do multiple people use your space? Do you have general or specific...
  2. Design & Plans
    Hi, I'm looking at making some drawers out of 12mm thick plywood. - these plywood boards will be veneered - BB Grade Baltic Birch - (see attached example diagram pulled from internet) My concern is warping/ deforming of the drawer (+ furniture). I've had a chat with the guy veneering it...
  3. General Woodworking Discussion
    I am hopeful someone will be able to give guidance on the correct way to do my project. I am building some laundry room cabinets with the face frame and doors out of walnut. I'm doing a shaker style with full overlay. I am going to use 3/4 plywood for the cabinet boxes. But should I use walnut...
  4. General Woodworking Discussion
    Previous owner installed sink base cabinets to use as a work table. There is no sink- just the countertop. Is there a way to convert the false front drawers into real drawers? There is nothing behind them. When the doors are open, it's a giant 35"w, 28"h gaping hole, but only 21"h is usable...
  5. Woodworking Videos
    I was building some drawers for a couple vanities for my mother and I have been wanting to make another video for everyone. I figured I would post my simple, but effective, method of making drawers in my shop. It's pretty simple really and doesn't require special joinery or special tools. Have...
  6. General Woodworking Discussion
    I need to do a lot of work before I sell my present house. I have always been pretty handy, but need to buy the power tools that I need to rebuild my kitchen and bathrooms, as well as install hardwood floors and crown molding. I purchased a Craftsman router joint template kit to allow me to...
  7. Design & Plans
    Does anyone have any plans/ideas for how to build a "wheelchair friendly" workspace? I have been asked to custom build a desk type piece of furniture that will be wheelchair accessible. The idea is to allow the person using this piece to access art supplies from cubbies/drawers and have a...
  8. Trim Carpentry & Built-Ins
    I've made some closet space in an attic kneewall. So far it's just open cabinets made of 1/2" MDF, but I'd like to put some drawers in some of them. The drawers would be 30" wide and 24" deep. Would the MDF be able to hold this? What type of material would you recommend for the drawers? Thanks...
  9. Joinery
    hey guys, i need some help with a project i am doing. its a wine cabinet with a few inset drawers. The drawers are killin me, i dont know where to start. could some one give me some advice? it would be much apretiated.
1-9 of 9 Results
Top