Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Power Tools & Machinery
    I was setting up my Dewalt 7491RS table saw and while putting the fence on I dinged it against the side of the saw. Now there's a few small divots on the surface of the aluminum fence and it has very tiny sharp bits that I can feel as I run my hand over it. I'd like to smooth these down since...
  2. Power Tools & Machinery
    I'm trying to understand if I'm using this tool incorrectly or if it is defective. I get collisions when using the tool when backing out of a cut. It's a brand new tool--a gift from my wife. Here's a close-up of the split pin colliding with the blade release latch.
  3. Power Tools & Machinery
    My old Dewalt Radial Arm saw is screaming for new bearings. I can't seem to find the part number of the bearings that it needs. I have been told that Dewalt/Black and Decker purged all there old maintenance information on the vintage saws years ago, and so far I have not been able to identify...
  4. Power Tools & Machinery
    My DeWalt 7490X table saw fence is stuck and will not flip over. It was working just fine and now it's stuck. Any ideas?
  5. Power Tools & Machinery
    (just some context, I am a high school student with no job, drivers license, car, or money) my Dewalt 7749 radial arm saw belonged to my grandfather. it worked at first but after my parents brought it from my grandparents to our house,( a 3 hour, 170-mile drive one way) I had to take the saw...
  6. Power Tools & Machinery
    Hi All. This is my first post... I bought a new 735X and have been using it successfully for only a few days. Suddenly it won't feed the board. I took it apart and there are no clogs, broken chains or belts. When I pulled off the front cover I can see the problem is that the right shaft...
  7. General Woodworking Discussion
    MAKE YOUR OWN ZERO CLEARANCE INSERT FOR A DEWALT DWE7491RS TABLE SAW Introduction: This procedure shows you how to make your own zero clearance inserts for a DeWalt DWE7491RS table saw. The design is simple: Match the basic pattern, but use a bolt to rotate a scrapwood cam in place, with...
  8. Power Tools & Machinery
    Hi, i've got my hands on a Dewalt 733 type1 planer that is as good as new. This is possibly becoming my first planer. Any thoughts on this machine? Pros/cons. What should I look out for. I'm aware it's an older model, but hopefully for me it's plenty of runtime left. Feel free to mention other...
  9. Power Tools & Machinery
    Hi there, I have a DeWalt 735X planer, and the screw for the depth crank has fallen off and disappeared. The part # is 5140054-60. Is that a standard-size screw that I can buy at Home Depot? Does anyone happen to know the length and TPI? Thanks a bunch, John
  10. Woodworking Talk Classifieds
    I got a Dewalt DW374 a few weeks back and changed out the cutter head and knifes for a Spiral cutter head. They are brand new never touched wood. I would like $100.00 shipped for all. Let me know if you would like them. Thanks Mike
  11. Dust Collection
    I'm still perfecting the designs... but my near dustless Miter Saw Enclosure design and methodology is second to none after just a one week project. The Methodology involves using SketchUp and a few techniques that any SketchUp novice can do after watching my YouTube videos. The Design has the...
  12. Power Tools & Machinery
    I'm just getting into woodworking and consider myself a novice. I would like to have the tools (not to mention the expertise) to create box, dado, and maybe a few other types of joints for boxes and drawers. To get my woodworking hobby of the ground, I bought a Dewalt 745 table saw. It's a great...
  13. Power Tools & Machinery
    I am in the market for an additional post type DeWalt 18v XRP battery. The generic off-brands are cheap (all over Ebay for about $26 inc. shipping) and most come with a 30-day money back, 1-year warranty. I should add I'm not usually one to skimp and never would on any sort of equipment with...
  14. Hand Tools
    I have a B&D Quantum 12V. 20 years plus. Rebuilt the battery packs twice. My only complaints are, it's 3/8" and it doesn't do high RPM, needed for small diameter bits. My Craftsman corded drill, 30 years plus, is starting to smell of burned insulation when I use it, and the bushings scream. No...
  15. Power Tools & Machinery
    A friend has offered this to me for sale. It is not working but I haven't heard yet what it is or is not doing. One of the attached pics is what the seller sent me to tell me the model number (11531). I have scrounged and scrounged, used google, bing, yahoo but am coming up with ZIP. None of...
  16. Trim Carpentry & Built-Ins
    I am in the process of rebuilding a house from 1850, this is my house so the woodwork in some of the house is way more then in a normal house but I want it to show what I can do. This is a window seat that I built for our bathroom. I will post some more things that I am doing as well. Rob
  17. Power Tools & Machinery
    I have a PC 743 that is on the way out. I am looking at worm drive saws. I have it narrowed down to the Makita and Dewalt. Does anyone have any real world experience with these? Thanks
  18. Power Tools & Machinery
    I am just wandering what brand of shop table saw do other people use and what are the pros and cons. I personally use jet and I like it but I am interested in Grizzly. If you choose Other please let us know which one and why. www.jakeschs.com
1-18 of 18 Results