Woodworking Talk banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-40 of 44 Results
  1. Power Tools & Machinery
    Hi all, I have a Delta 36-600 10" table saw. It uses a notched belt ("timing belt") with matching teeth on the drive shaft so it cannot slip. When this saw starts up it comes to full speed in about 1/2 second. The inertia of the arbor and blade puts a huge strain on the belt (and other...
  2. Power Tools & Machinery
    Hello Everyone, I'm new to this forum so I appreciate the help. I need help pricing out a few items. The first being a Delta 16" Band Saw (Model 28-560), good condition with extra blade. It is on the original stand as well. I've read around that $500 is a good asking price but wanted opinions...
  3. Power Tools & Machinery
    As many of you know I am in the process of restoring a 1955 wood cutting band saw. Parts of it are cleaned up and ready for paint so I am wondeering what you folks use for paint. I know Rustoleum seems to be popular on another forum I belong to. Sherwin-Williams seems to be another. What do most...
  4. Power Tools & Machinery
    Hi all, I am restoring or refurbishing a vintage Delta 14" band saw and need some advice on bearings. I am referring to the bearings in the upper wheel and on the lower shaft. Where do you get your bearings and do you have any idea what numbers I would need to order. Any help appreciated...
  5. Dust Collection
    Hello all, I'm posting this in a wood working forum because it seems that you guys have much more knowledge about dust collection than anyone else lol. We are a computer shop in Michigan. We have built a homemade "dust out" station for dusting out computers. It is powered by a Delta 50-760...
  6. Dust Collection
    I need a dust chute for a Delta Unisaw 36-812 Any suggestions?
  7. Power Tools & Machinery
    The search for my first table saw has kicked into high gear, with a current opportunity to buy a brand new Delta 36-640, with the extension plate and precision guide fence. It's clearly exciting to think about ripping more than what can be flipped on the sliding miter, and finished with a...
  8. General Woodworking Discussion
    I have been on the lookout for my first decent table saw for quite sometime. A Delta Unisaw came up on craigslist that I am interested in. I live in rural northern MN so my options are kinda limited when it comes to Craigslist. He is asking $500. Model: Delta 87-369 This one is about two hours...
  9. Power Tools & Machinery
    I have a Delta 34-670 table saw. I am going through drive belts about one per year after only light-moderate use. I've replaced the bushings, and I don't see anything visibly defective in the belt area. I'm at a loss as to why these belts are wearing down to smooth so quickly. I'm starting...
  10. Power Tools & Machinery
    Hi guys, I need to upgrade the original crappy band saw I have in my shop. This seems like a good deal to me. Anyone have any experience with these BS's? http://philadelphia.craigslist.org/tls/3845535547.html
  11. Power Tools & Machinery
    I'm having some alignment problems with my 20-year old Delta contractor saw, model 34-444. Facing the saw from the front, the blade is too far to the right. At 45 degrees, the blade almost touches the tight edge of the slot in the table insert. I've tried loosening the 4 trunnion bolts and...
  12. Power Tools & Machinery
    I am rebuilding a 34-450 unisaw and am looking for an arbor, it has a #LTA408 stamped on it. It is part #13 on the official parts page with a replacement #422043145002. I can't find one anywhere and need this to complete the renovation. If anyone has a part or nonworking saw , if you could...
  13. Power Tools & Machinery
    Hi all, I'm looking to replace the thrust bearings on my Delta 14" bandsaw. It seems this part is not that readily available. I'm not sure if I want to spend $200+ on the aftermarket ones, since I don't use this saw heavily. I've only seen them on eBay and Highland Woodworking. Does anyone...
  14. General Woodworking Discussion
    Anyone know where I can buy a complet Delta Unifence? I'm restoring my Old Delta Unisaw and that fence would be a nice upgrade. THX
  15. Power Tools & Machinery
    Table Saw Buying Advice (Jet vs. Delta) I'm new to woodworking and I'd like to buy a decent table saw. I've been looking on Craigslist for the past few months and I keep coming back to a posting for a Jet JWTS-10 with a HTC Brett-Guard Table Saw Safety Tool (Model # 10ALP) and a mobile base...
  16. New Member Introductions
    I'm pretty new to wood working and just wanted to say hello. I've already read a ton on this forum and love it. I just wanted to officially make my first post and tell you about the new project saw I just acquired. I think I got a good deal on this Delta 34-801 but I think it is in need of some...
  17. Power Tools & Machinery
    Im needing to order some parts for a Delta table saw for someone. I have the serial # of the saw but dont know any other information. Is there a way I can find out which saw this is so I can find out what parts I need. Thanks Jerry
  18. Power Tools & Machinery
    I am just wandering what brand of shop table saw do other people use and what are the pros and cons. I personally use jet and I like it but I am interested in Grizzly. If you choose Other please let us know which one and why. www.jakeschs.com
  19. Power Tools & Machinery
    First drive belt lasted 5 years. Now installing 3rd drive belt in last six months. Drive bearing seems ok and no other apparent problems. Any suggestions or similar problem.
  20. General Woodworking Discussion
    Hi, I've been pondering driving about 150 miles to buy a table saw, Delta 34-444 serial number 96A 94033. The seller is asking 250 but i don't know if its worth the drive and the price. Does anybody know anything about this saw? i read where some of these were made in the US but then production...
21-40 of 44 Results
Top