Woodworking Talk banner
cutting
1-9 of 11 Results
  1. Wood Carving
    Hello all, I'm new to this forum and to woodworking in general. I'm starting my first woodburning project (attempting to do a fathers day gift) using a 3/4" piece of untreated pine framing lumber. I would like to round out the corners on the piece and need some advice on the best tool for the...
  2. Tips, Tricks, & Homemade Jigs
    Hello all, looking for some help. I am new to the forums and a basic, at best, woodworker. I would like to make a wooden life ring like the one pictured. My plan is to use clear maple or birch for the white sections and purple heart for the red sections. Here's the catch, I would like each...
  3. Hand Tools
    What I have is a stack of three washers (3/8th inner hole) that have been steel-epoxy'd together to form a cylindrical stack. I need to do some shaping of this stack, and they are zinc-plated. What are some cheap options that could get the job done? I need to be able to cut one side flat and...
  4. Power Tools & Machinery
    So after a couple weeks of research I finally have enough of a clue to ask, which blade to buy? I have a 14" Grizzly. I want to do a lot of straight and curved cuts on mostly 2x4 pieces of wood. I was thinking a 1/4" blade for curves, and a bigger one for straighter cuts. TPI is still...
  5. Design & Plans
    Hi. Does anyone have any idea of how I could best make a group of perfectly equal-sized, equilateral triangles? (Each of the three sides of the individual triangles would be around 5" long.) I've attached an image of something that would be similar to what I'm trying to make. I spoke to a guy at...
  6. Tips, Tricks, & Homemade Jigs
    Hi. Does anyone know the best way to cut large, precise, angled cuts like the ones on these stools? (I imagine the stools are about 18 inches tall.) Thanks. ...And BTW, thanks for all your help and advice so far with my other posts guys. Your generosity with your knowledge is beyond appreciated.
  7. Woodturning
    Okay, I'm having trouble with my bandsaw cutting my logs into bowl blanks. The logs are split and 8" - 10" thick. When I try to cut the logs into circles, the blade pulls to the right and starts to bind. The bottom of the blade gets twisted more than the top. I even built a circle cutting jig...
  8. Project Showcase
    Walnut, ash, maple, hickory and sycomore. Thanks for [email protected]:thumbsup:
  9. General Woodworking Discussion
    Hi...I'm new here...could someone please help me? I'm trying to cut a series of wave-like curves in a piece of laminate that will then be glued to a vertical surface for a backsplash. I'm using a jigsaw with a plastic laminate blade, but am having trouble properly supporting the laminate so I...
1-9 of 11 Results
Top