Woodworking Talk banner
cure
1-3 of 3 Results
  1. Wood Finishing
    I came up 4 boards short on my ceiling project adding them later but the boards look a little darker than original danish oiled boards, will they cure further to match?
  2. Wood Finishing
    Ive done three layers of minwax oil based polyurethane, 24 hours between coats, lights sanding with 400 grit. My third coat was done 48 hours ago and it was meant to be my final but Im worried about its durability. I can easily depress the finish with my finger nail. Its not a hard wood, maybe...
  3. Wood Finishing
    I painted a wood surface using acrylic-latex paint (after priming it) and I gave it a good 6 weeks to cure. I was about to apply polycrylic (I need a hard, no-stick surface) but I noted a few spots that needed a touch up after a light sanding. I took a cotton swab and gently applied new...
1-3 of 3 Results
Top