Woodworking Talk banner
craftsman
1-20 of 49 Results
  1. Woodturning
    Hi! I'm looking for my first lathe and saw this for 200. I'm wondering if that's too much money or a fair price. Thanks!
  2. Power Tools & Machinery
    Quick backstory: I'm relatively new to table saws and I feel a little overwhelmed looking at the options. I am building custom cabinetry (kitchen and bathroom) and so I am handling large plywood sheets regularly. The two things that are most important to me are: 1. An extension if possible to...
  3. Power Tools & Machinery
    I have a Craftsman 152 saw and, like many, have hated the fence since the start. My saw is second-hand, and the fence had some broken and missing components, making it doubly frustrating. I just bought a Vega 26" fence system, and before I take it out of the box and start dismantling my saw, I...
  4. Power Tools & Machinery
    Hoping someone can help. I have this old 19.2v saw and it's missing the washer assembly. So i purchased the two pieces I could find online, but there is one washer (part #22) that I cannot find anywhere. Circular saw blade washer Part #6112004 This part is discontinued and no where to be...
  5. Power Tools & Machinery
    Hi, I was wondering if anyone had experience with this model of table saw? I have the opportunity to buy one for $800. It comes with a upgraded 5hp motor, the original motor as well, a Pro-rip/Evolution1 mirco-adjustment fence by Voss Technologies, delta tenon jig, cross-cut sled, and miter...
  6. Power Tools & Machinery
    I have an old craftsman 10" contractor table saw. Picked it up, cheap, on FB marketplace, to replace my even crappier old craftsman portable table saw, as the fence was worse than useless, it was dangerous. The angle adjustment, however, is the worst design possible. Pure friction!!! Who the...
  7. Power Tools & Machinery
    I have a Craftsman 152.221140 hybrid saw. It has the main table area plus one extension on each side per standard. Is it possible to add more extensions? If so what should I look for?
  8. Power Tools & Machinery
    I picked up an old Sears Craftsman 6-1/8 Jointer Planer for $30 at a garage sale (Model 113.206931). I dug up the manual (attached) and intend to make it usable again....unless anyone can convince me it's not worth it :smile2: Motor runs, belt is older but still works. The blades turn and...
  9. Power Tools & Machinery
    Hello, I inherited a craftsman floor drill press model # 113.213811 and seems to be running pretty loud and rough. There is a little wobble at the chuck but I'm not sure if it's the spindle or not. I plan on replacing the chuck, the quill bearings, the pulley bearing, and the belt with a link...
  10. Hand Tools
    Hope this is the right place. I recently bought a then-unknown brand brace at a pawn shop for $7. With some pliers I was able to turn the ratchet and could switch it with some effort. The shell and jaws looked to be serviceable. Everything was rusty, but the wood looked to be in good shape and...
  11. Hand Tools
    I though a few of you might enjoy seeing my recently rescued circa 1928-30 Craftsman model 5264 smoothing plane. Craftsman tools were introduced as the newest “House brand” by Sears, Roebuck and Co., in the 1928 Spring catalog. The “Wavy” Craftsman trademark on the brass lever cap inset and...
  12. Power Tools & Machinery
    Any advice on finding parts for a Craftsman Miter Saw Model 315212120? I'm looking for part of the blade assembly .... Part Number: 980270-001 and Part Number: 980288-001....the washers that hold the blade on securely. Sears Parts Direct have been no help nor has ereplacementparts.com. The...
  13. Power Tools & Machinery
    Hello, I am new to this forum. I did some searching to see if this has been addressed, but didn't find anything. If there's a thread you can point me to where my question has already been answered, that would be great. I have a craftsman table saw model 315.228390, about 20 years old. I love...
  14. Power Tools & Machinery
    Our local Sears is going out of business and they have the floor model of their $379 3/4 HP 15" drill press marked down to $210. It seems like a pretty good deal and I'm kind of on the fence about buying it. I know there are other drills available that might be a bit better, like the 1 HP Porter...
  15. Power Tools & Machinery
    I've been a lurker here for while and I finally decided to post with a question. I've owned a Craftsman hybrid saw for a few years now, the #21833. It's served me well as I began my foray into woodworking, building some shop furniture, swingset equipment, and even a built-in home office. I...
  16. Power Tools & Machinery
    I recently acquired a rust-covered Craftsman table saw, model 113.27520, ca. 1956. I've been restoring it and it's been going well. The biggest issue thus far was that the original Craftsman motor was bad. I just bought another old, identical motor, model number 115.7534. I know very little...
  17. Power Tools & Machinery
    Hello, I was recently gifted a Craftsman table saw (see picture) It is a model Number 113.298762 As you can see from the picture, it has a vacuum system. I won't be using that and will be removing it shortly. Because of the vacuum system on it currently, the factory Guard Assembly has...
  18. Power Tools & Machinery
    I am unable to elevate (or lower) the arm of my Craftsman 10 inch Radial Arm Saw, Model 315.220100. I bought it used just over ten years ago, and it was a year old at that time. It has been a while since I have had cause to elevate the arm, but I was able to do so in the past. I recall it being...
  19. Power Tools & Machinery
    hello, I moved to live in thailand, and here table saws are either crap low quality or overpriced high end ones! I always wanted to buy the ridgid r4512, and even if ridgid have business here, they don't sell their table saws. After long researches I finally found the exact copy (coming most...
  20. Power Tools & Machinery
    Howdy, I'm new here and somewhat new to woodworking. Was in industrial maintenance all my life. Company closed plant and told me I was retired. So I found this mortising machine at a pawn shop for cheap. Craftsman model 351.219061 and I wonder if the JET mortiser bit and chisel sets will...
1-20 of 49 Results
Top