Woodworking Talk banner

clamping

  1. Design & Plans
    three 36" t-tracks by two 24" vertical t-tracks '3/4" wide' on 40"x28"x1.125" wood board 'mdf or blockboard or plywood' bench dog holes size is 3/4" and are of two groups; dig holes are vertically spaced by 3" measured from the center of the middle t-track and are horizontally spaced by 5" for...
  2. Project Showcase
    Someone on another forum was asking about my bench after seeing part of it in a photo of some WIP, so I prepared an explanation and thought I'd post it here too for anyone who is interested. To start, I should say I dont like bench dogs. I need to use my bench for all sorts of things including...
  3. Hand Tools
    I going to buy some new clamps I have some quick grip style clamps a few C clamps and some squeeze clamps;I don't build highboys or large furniture.So my question to you is what is your go to clamp style and size,what is the one you use the most.F style,bar,C,etc. and size 12,18,24,36,etc...
  4. Trim Carpentry & Built-Ins
    Building a full 13 foot wall of bookcases for my daughter in LA. I am in northern California. Cabinets on the bottom, shelves on top. I'm going down this weekend to install them. Only thing I need is the "cabinet top". The lower cabinet cases are of 3/4 ply, and plan was to put a single...
  5. Joinery
    I have a number of YouTube videos demonstrating the clamping of various joints that may be of interest to many woodworkers. You may want to check them out. They can be accessed through my web site: http://www.blokkz.com/. Good luck with clamping since it always seems to be a challenge.
Top