Woodworking Talk banner
case
1-4 of 4 Results
  1. Joinery
    Hi everyone, I'm about to build something like this (http://global.rakuten.com/en/store/joystyle-interior/item/common-120l-na/) per the wife's request. I'd typically do this with veneered plywood, but I have a lot of solid cherry in my shop that I'd like to use. My question to you all is this...
  2. General Woodworking Discussion
    Hello Everyone, For some reason I'm having issues with finding the right rabbet bit. My father gave me a set of router bits with a 1/2 inch shanks and one of the bits is a rabbet bit that cuts 1/4 inch (radius of the bit), but I can only use 1/4 shank bits on my router so I started looking...
  3. General Woodworking Discussion
    I was asked by a friend to make him a wooden pool cue case. Anyone have any suggestions on the best way to attach the wood? Not looking for any outside marks and it needs to be really solid. Thanks for the help ahead of time. Patrick
  4. Design & Plans
    I am building a cabinet for my wife's pastel chaulks. each drawer is 18" wide, 12" deep, 2" high. It is built out of standard nominal 1" poplar (actual 3/4"). I will dado a 3/4" groove in the sides of each drawer to accept a 11/16" rail that I will attach to the case sides. So far so good. My...
1-4 of 4 Results
Top