Woodworking Talk banner
cabinet
1-20 of 42 Results
  1. General Woodworking Discussion
    I have been putting together a base cabinet but am having trouble with the face of a larger drawer. The face is not sitting flush with the frame. The cabinet itself looks tweaked by the slides somewhat, as you can see in the pictures. I think the drawer guides need more adjustment. Any...
  2. Design & Plans
    I recently acquired this vintage record cabinet and the hinges need replacing but I’m pretty new to woodworking/refinishing and don’t know what type of hinge this is so I was wondering if someone could help me with what I would need to look up to find a replacement hinge ! this is a photo of...
  3. Trim Carpentry & Built-Ins
    Hi all, I am an amateur carpenter and have just installed my first kitchen cabinets. The build was near perfectly square before moving the cabinet into position. After moving the cabinet into position, I noticed that the bottom shelves were not fitting correctly anymore. A few of the shelves are...
  4. Design & Plans
    I'm looking to upgrade the look of my bathroom vanity. Instead of replacing it completely I thought I'd just swap the panels. So instead of the plastic-like white, I'd like it to be a nice walnut wood. Basically simple flat panels, like the existing ones. Question is, how? (I'm not experienced...
  5. New Member Introductions
    I'm the new guy! I work as a Customer service agent for a Furniture/Cabinet company called CabinetParts.com and I'd love some advice to help me support woodworking lovers such as ourselves. This is a part-time job I've found really helpful during these difficult times. Hope you guys can...
  6. New Member Introductions
    Last year I received a Triton Router module for my birthday. To my dismay the Triton Workcentre it fits into is no longer available in the US. I have emailed Triton (UK & USA) no answer, Rockler, Home Depot and a couple of others- no answer. (did get some adds for sale items):sad2: This module...
  7. General Woodworking Discussion
    I am building my first cabinet with drawers. I did a test run with the 1st drawer by setting it in the cabinet and attempted to place the drawer slides next to it in order to confirm the fit. Turns out I made my first drawer too wide (I am sure many of you are not surprised.) To address this I...
  8. Trim Carpentry & Built-Ins
    Hi All, I'm new here. Just building some extra cabinets for my kitchen. I need help on copying the existing routing profile on the cabinet door edges. I have a router table but just not sure which combination of bits (or bit) I would need to get this profile. The doors are just simple inset...
  9. General Woodworking Discussion
    Hey, my cabinet front has broken off, and all four plastic parts have been broken. Anybody know where to find these parts or solve the problem? I am not very handy. I am new here and I just made an account just for this :grin: The dimensions of the plastic thing is 1.5cm (width), 3 cm...
  10. General Woodworking Discussion
    Hello, I'm currently searching for some specific hinge that seem to just not exist anymore. I went to a lot of local store and searched hundreds of pages on different canadian seller and I just can't seem to find anything close to it. There's no model number or even any writting on them so it's...
  11. General Woodworking Discussion
    I am trying to determine an acceptable salary for a cabinet door builder. There are many listings on the internet for the average salary of a cabinet maker, but what I am unsure of is if there is (or should be) a difference between the salary of a cabinet door maker and a cabinet(box) maker? My...
  12. Trim Carpentry & Built-Ins
    I'm building maple face frame cabinets with prefinished 3/4" plywood boxes. For the wall cabinets, the sides, top, and bottom are tongue and grooved into the face frame and will be glued. The sides have dados that the tops and bottoms fit into and will also be glued. The upper rear rail is...
  13. Woodworking Videos
    Check out this video that displays how to Jim installs teak cabinetry in Miami in this weeks episode and showcases other work that was done in the penthouse condo of his client. I appreciate the feedback, share with your friends and if you have any questions, feel free to ask!
  14. General Woodworking Discussion
    Hey everyone, I am building some nightstands for my wife and I want to try to use dowels. I have a good self centering jig and I have used successfully used them in the past for face frame construction and alignment help but I have never tried them for putting together a cabinet/carcuss. I...
  15. General Woodworking Discussion
    I am hopeful someone will be able to give guidance on the correct way to do my project. I am building some laundry room cabinets with the face frame and doors out of walnut. I'm doing a shaker style with full overlay. I am going to use 3/4 plywood for the cabinet boxes. But should I use walnut...
  16. Woodworking Videos
    Cheap and easy door handles I came up with for my shop cabinets - https://www.youtube.com/watch?v=VaM-0NlodDI
  17. Design & Plans
    I would like to make a cabinet for under my stairs. The dimensions are 71" tall, 72" wide and 34" deep. I will be 4" short of a complete triangle. Any guidance is appreciated. I have tried to use many different software programs so I could determine the best measurements for pullouts...
  18. Wood Finishing
    Hi there, I am new to WT and I am tackling a furniture refinishing project. I picked up a vintage cabinet at an estate sale and I am trying to figure out if the veneer is rosewood. I had to completely sand the entire top due to what appeared to be a "stain" stain in the shape of a couple1...
  19. Project Showcase
    Bookshelf - Kids furniture Making a Bookshelf - furniture It is made of plywood of pine and mahogany. project vídeo: http://youtu.be/9_cnkaAbtCM
  20. Trim Carpentry & Built-Ins
    I'm installing 42" tall kitchen cabinets in a 96" tall room. I'm assuming the ceiling isn't perfectly flat. How do I install the cabinets so that they are all at the same level? I cant seem to find any guides online on this. I'm assuming that I find the lowest point, and install them there. Then...
1-20 of 42 Results
Top