Woodworking Talk banner
blade
1-12 of 12 Results
  1. Power Tools & Machinery
    I have a strange issue with the cuts on my table saw. I have an older 3 hp Delta Unisaw. The beginning of any cut has a slight bevel leaning to the right and the back of the cut piece has a slight bevel angle to the left. It’s like there is a twist in the end of a crosscut. This happens with...
  2. Power Tools & Machinery
    Hi all, Consider me new in the band-saw world. Long story short - I can't cut a straight line to save my life, as the blade is all over the place. I don't think it's feed speed, as I can inch along and still have same problems. I have guides as close to the wood as possible, but doesn't mean...
  3. New Member Introductions
    Hello fellow woodworkers! Earler this year I made a table saw from a circular saw. Now I'm not completely satisfied with the cutting depth, so I may wanna change the blade to a larger blade. This means that I have to remove some of the parts on the table saw, which I don't think is a big...
  4. Power Tools & Machinery
    So I just finished watching the 35 minute Alex Snodgrass video on bandsaws. I found many parts of that video useful, although I had some things I want to bounce off of anyone here that has experience. 1.) He mentions how coplanar doesn't really exist, but every single source I see anywhere else...
  5. Power Tools & Machinery
    So for Christmas I got a beautiful anniversary edition grizzly bandsaw. The main problem thus far is that center cutout on the table where the blade goes. Are those things designed to be chipped? Does that hurt the blade? I was trying to do some curves last night in a 2x4 and there was a spark...
  6. Power Tools & Machinery
    hello, I moved to live in thailand and I am going to buy a tablesaw. unfortunately there is not a huge selection available here! either very low quality models or very high end ones. what I have been able to find are a 8” cabinet saw 1.5hp with sliding table which looks actually quite...
  7. Power Tools & Machinery
    I'm totally new to bandsaws. I recently purchased the biggest one that I could afford and that will fit in my little storage shack that doubles as a very small work shop: a 10" Craftsman Model 21400. I have about 20 minutes using it before I realized I needed to learn a lot more, so I watched...
  8. Power Tools & Machinery
    I replaced the blade and now it keeps running off track. I've adjusted the tension and the blade is still rolling off the track. Help
  9. Power Tools & Machinery
    Hi, I'm having a strange problem with my Wilton Tradesman 14" bandsaw. Ever since my most recent blade change I cannot get the saw to cut straight. No matter ho I adjust the tension, guides, and wheels (i've readjusted several times and even went all the way back to the manual) the blade always...
  10. Power Tools & Machinery
    Hey all, I picked up a used 10" Rigid TS 3650. It's in great shape overall but I'm noticing an occasional vibration in the blade during cuts causing the cut to be slightly wider in the spot it vibrates. The vibration also makes a definite sound. This happens no matter how much material I am...
  11. Power Tools & Machinery
    Bought an old Powermatic 63 Table saw that had been used for 20 years to build sets for the theater groups at MIT. Lots of paint, some rust, lots of gunk---but it had a nice 50" Vega fence and was quite cheap. I disassembled everything and it's all cleaned up now. Put on the PALS alignment...
  12. General Woodworking Discussion
    Hi, I recently got a new bandsaw (SteelCity 16") and put a 1", 3tpi resaw blade on it. I carefully followed tensioning, tracking and guide setting practices. Nonetheless the blade drifts significantly fore and aft about 3/32" I would guess. The previous blade (1/2" 3tpi) did no such thing...
1-12 of 12 Results
Top