Woodworking Talk banner

bearings

  1. Power Tools & Machinery
    Hello, I inherited a craftsman floor drill press model # 113.213811 and seems to be running pretty loud and rough. There is a little wobble at the chuck but I'm not sure if it's the spindle or not. I plan on replacing the chuck, the quill bearings, the pulley bearing, and the belt with a link...
  2. General Woodworking Discussion
    Hi there, my name is Garrett. I am relatively new to woodworking. Was recently laid off and found some spare time on my hands so i decided to try my hand at it again with some home improvement type projects. Well I really needed a table saw as I was using a circular saw mounted to a table and it...
  3. Power Tools & Machinery
    After waiting for the right CL/auction deal for more than a year, I finally picked up a 14" mostly-iron bandsaw (Delta 28-245) and as a bonus a 6" jointer (old version of Jet jj-6csx); no extras, acceptable but not great condition. $350 total. The BS bearings are frozen... the top one is no...
  4. Power Tools & Machinery
    I am restoring a 50's craftsman 113.27520 table saw and I cannot remove the bearings and the flange closer to the threaded end because they are pressed in(ithink). If anyone has experience with this can you tell me how you went about this problem? Thank you.
  5. Power Tools & Machinery
    Hi all, I'm looking to replace the thrust bearings on my Delta 14" bandsaw. It seems this part is not that readily available. I'm not sure if I want to spend $200+ on the aftermarket ones, since I don't use this saw heavily. I've only seen them on eBay and Highland Woodworking. Does anyone...
  6. Power Tools & Machinery
    While raising some panels today on my jet shaper (JWS-22CS) I started hearing what sounds to me like bearing noise. I removed the belt and spun the spindle be sure the noise wasn't coming from the motor. It is definitely coming from the spindle assembly. Does anyone know how to remove this...
  7. Power Tools & Machinery
    I have an old 4" Delta jointer that has served me (and the previous owner well for 25+ years) and I, like some of the other posts, have been afraid to change out and sharpen the knives. But now I really need to replace the bearings, which will force me to replace knives anyway ! (*Lesson...
Top