I am planing a dinning table made (primarily) of highly figured Bubinga.
I am considering using either General Finishes
High Performance Water Based Polyurethane Topcoat
Arm-R-Seal Urethane Wipe-On Topcoat
and, for either one, perhaps appying the topcoat over Zinsser Bulls Eye Clear...
I am working on a piece of walnut and used Watco Danish penetrating oil as the first finish. I applied it exactly as the contrainer instructs. The directions say that if you are adding another finish, such as polyurethane, let it dry for 72 hours -- which I did.
I then put on a thin coat of...