I made this for the purpose of making some Adirondack chairs. The top rotates to enable me to stay in one location and spray paint the chair, then rotate 90 degrees and spray some more and only have to hang one drop cloth to catch the spray. The right side has space for the air compressor and also a little storage in the back. The front has shelves for the most used tools and not having to plug them in every time you need to use them. With the lack of floor space, the castors let me move it. The height is about 28 inches and the top is 3 foot square with a 1 1/2 inch overhang to allow for clamping if needed. It's made of glued-up pine, I'm not a fan of plywood. I'll probably change the location of the 4 gang outlet so the cord situation might improve.