Woodworking Talk - Woodworkers Forum - View Profile: Tony B

Tony B Tony B is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 10 of 15
  1. woodnthings
  2. NoThankyou
    11-04-2019 05:26 PM - permalink
    NoThankyou
    Hi Tony,
    I'm like you, also retired but 77. As for work, I have worked as a volunteer working for the Registrar of Voters. Usually it is about 4 hours of training and one brutal day of 18 hours. Now we have changed to 'Voting Centers' that will be open for 10 days. Typically open at least 16 hours each day. The statement, 'I don't want a full time job' really resonated with me. I think that I am going to retire from the voting job too.

    I don't remember where, but it was put this way; "When you make your hobby a job it ceases to be fun."

    Good luck my friend,
    Rich
  3. Ciara Ciara
    05-21-2016 03:19 AM - permalink
    Ciara Ciara
    Hello my dear,
    How are you doing today? i hope my message find you in good health over there, please my dear i saw your profile today and i became interested, my name is miss Ciara Sands. I wish to have you as a friend, if you care. I have an important reasons to request your interest for a Serious Relationship, i will be happy if you can contact me directly to this my private email address([email protected]), so that i can easily explain to you more about me and also send you my picture because I have something very Important to tell you.

    Your New Friend
    Miss Ciara.
  4. bnwelch
    06-05-2013 09:40 AM - permalink
    bnwelch
    Hi Tony,
    Just picked up a Mill Route myself...Curious about your opinions/toughts on it...
    Also, any chance you have a copy of a manual for it?
    thanks
    Brian
  5. woodglue
    02-26-2012 04:50 PM - permalink
    woodglue
    Tony, i have a Baba 30 sailboat now, but have had a number of them in the past. does the invite include me(for the boat, well would love to see your shop also), only problem is distance (SC).

    Van...

    Ps can't believe to meet two guys that are sailors on this forum.
  6. ktwheeler15
    12-09-2011 12:05 PM - permalink
    ktwheeler15


    Hi Tony,

    I am totally new to any type of woodwork, but recently uncovered a love of power tools. :)

    I am making a kitchen table for my apartment, and went looking for ideas on black "stain", and I found an old post on this site with the exact look i've been wanting.

    Was this a hard look to get? I've done a lot of painting... but no staining. I would be starting with new wood. Can you tell me what you did to get this look? I'm basically after a dark "black" color that you can still see the grain through. Does the wood type make a difference?

    Sorry for all of the questions, and thanks for any help you can give me!

    Katie
  7. jamez
    12-07-2011 12:04 AM - permalink
    jamez
    I saw a post from 2008, you had a shop in a storage unit. I live in seabrook, texas and I am very interested in doing this. I was wondering what facility you did this at? How did you get power? Did they charge you extra for this?
  8. Michael H
    08-03-2011 03:35 PM - permalink
    Michael H
    Tony,
    Came across your (8/17/08) thread about play problems in the blade height adjustment on your Delta contractor's saw. You may have already realized there are eccentric sleeves on the hand-wheel shafts that adjust "lash" or play between the spur gears and the worm gears. This mechanism adjusts the space between the worm gear and the spur gear which will allow the blade height and angle to drift if the gears are not set close enough (and cause too much friction if they're set too close I think). Mine corroded and froze, and I think this is a common problem with the design, especially in wet environments. The lock nut and sleeve will turn with the shaft when this happens and cause difficulty in blade height (or angle) adjustment. I think that's what happened to your saw too. Check out this thread on another forum for more info:

    http://www.forums.woodnet.net/ubbthr...=&fpart=1&vc=1
  9. salrdav
    01-07-2011 04:43 PM - permalink
    salrdav
    Hey Tony. I am new to woodworking and need someone to mentor me. I work offshore as a boat captain so I am off two weeks at a time. I have spent 25 years as a machinist so I know tools and safety. I have been buying tools and have just about everything i need. I just am not one to get the picture from reading it. I need to do it and to watch it being done. That said I have been trying to find some place to work part time. Wages would be negotiable as it would have to be a win win situation to make it worthwhile for both of us. Any way it goes I would love to come down and meet you and see your shop. I live up north of The Woodlands in Montgomery. My dream is to work woodworking into at least a part time job where I can go even time until i retire in ten years. I am serious enough to be enrolled in a Marc Adams school in August. Oh and did I mention that I sailed and lived on a sailboat for years. Hope this is something you are interested in.
    Dave Dumas, 504 952-9601
  10. wfahey
    01-02-2011 08:30 PM - permalink
    wfahey
    Hey Tony, Happy New Year. How have you been? I sold the Catalina 36 and bought a 56ft Houseboat. The previous owner started to remodel the interior and lost interest so the Mrs and I spent the summer fixing it up. It is really spacious and comfortable. With 4 bedrooms and all the comforts of home there is hardly a weekend that goes by where we don't have someone visiting. But hey, that is why we bought it.

  About Me

  • About Tony B
    Biography
    Former Elec. Switching Sys Engr, offshore oilfield Inspector, Prof. boat Capt. and Prof. Woodworker.
    Location
    Dickinson, Tx.
    Interests
    Sailing, boating, woodworking, woodturning, RV traveling
    Occupation
    Retired Woodworker amongst other things.
  • Signature
    Tony B Retired woodworker, among other things.


    "Strive for excellence and settle for completion" Tony B

  Statistics

Total Posts
Albums
Visitor Messages
Total Thanks
General Information
  • Last Activity: Yesterday 10:42 PM
  • Join Date: 07-30-2008

  Friends

Showing Friends 1 to 9 of 9
  • 35015
    • 35015 is offline
  • Cricket
    • Cricket is offline
  • faith michel
    • faith michel is offline
  • G.Stout*
    • G.Stout* is offline
  • mat 60
    • mat 60 is offline
  • mdntrdr
    • mdntrdr is offline
  • rrbrown
    • rrbrown is offline
  • wfahey
    • wfahey is offline
  • wrvab4
    • wrvab4 is offline

  Mentions

07-22-2020
07:29 AM - Tony B mentioned BigJim in post Setting Up A New Shop
BigJim I have a very simil...
07-17-2020
10:59 AM - Tool Agnostic mentioned Tony B in post Bosch 1617EVSPK
...am confident that Tony B would be pleased wit...
07-15-2020
09:40 PM - Tool Agnostic mentioned Tony B in post White Oak finish
...h, but I agree with Tony B that if you apply it...
07-13-2020
10:34 PM - Tony B mentioned Tom-G in post Setting Up A New Shop
Tom-G Thanks for the inpu...
07-08-2020
03:55 PM - Tony B mentioned woodnthings in post Joist Spans for Gantry
woodnthings By the way, At le...
06-23-2020
10:41 PM - Tony B mentioned woodnthings in post Laguna Fusion 2 Table Saw
woodnthings Bill: I looked at t...
06-20-2020
07:57 AM - Tony B mentioned baserock love in post Access to jointer/planer for apartment dwellers?
baserock love Since you mention...
06-15-2020
04:39 PM - Tony B mentioned John Smith_inFL in post Antique Door Refinishing Challenge - Part 2
...rough Amazon.com John Smith_inFL The term 'clear' w...
06-09-2020
07:01 PM - Tony B mentioned John Smith_inFL in post Rustic Shelves
John Smith_inFL John, what I was ...
07:00 AM - Tony B mentioned GeorgeC in post Accurately setting a tablesaw fence with digital calipers
GeorgeC I agree. The back b...
06-07-2020
10:58 AM - Tony B mentioned woodnthings in post New Shop
woodnthings If you take the lon...
09:43 AM - Tony B mentioned John Smith_inFL in post Transporting a Drill Press
...and upside down. John Smith_inFL , I would never had ...
09:43 AM - Tony B mentioned RickKr in post Transporting a Drill Press
...ing to tip over. RickKr , The reason i thoug...
05-02-2020
11:19 AM - woodnthings mentioned Tony B in post I'd remove the door!
... There's a guy here Tony B who has done a lot o...
04-19-2020
09:17 AM - Tony B mentioned Thorn495 in post Birdhouse interior sealant
...se - he does. BTW, Thorn495 Looking forward to s...
04-10-2020
02:25 PM - Tony B mentioned Tool Agnostic in post Delta/Rockwell table saw/jointer
.... And thanks to Tool Agnostic, I gave feel comfort...
02-12-2020
08:02 AM - Tony B mentioned faith michel in post Scarf, Butt Joint or...
...y in progress is by faith michel. He is building a sa...
01-29-2020
10:00 PM - Tony B mentioned Kerrys in post Shop Fire
Kerrys Now that's one hell ...
01-27-2020
02:44 PM - Tony B mentioned Rick Christopherson in post Veneer Vacuum Question
Rick Christopherson is correct. I forgot...
01-21-2020
11:58 AM - faith michel mentioned Tony B in post Windows 7
...on't you use Linux? Tony B You can use Ubuntu...

  Quotes

08-05-2020
05:01 PM - AndyLee quoted Tony B in post Professional Chef, Novice Woodworker Just Doing Research
One of our members, mmwood,...
08-02-2020
12:27 PM - JRboostGSR quoted Tony B in post Drill Press
I am getting near the end o...
07-27-2020
10:19 PM - scott67 quoted Tony B in post picking lumber from home center
Use a cheap door for a real...
01:47 AM - [email protected] quoted Tony B in post Setting Up A New Shop
I have 20A in the self stor...
07-25-2020
12:19 AM - Paul Montgomery quoted Tony B in post Show us your shop!
Paul - nice video. Goes to...
07-24-2020
09:04 PM - JIMMIEM quoted Tony B in post How to cut a straight clean groove? Uber beginner
My first choice is a table ...
10:38 AM - cynrich quoted Tony B in post Repurposing an old Pup-up Camper
I think that anything other...
07-23-2020
09:55 PM - furnacefighter15 quoted Tony B in post Want to restore an antique cherry table my sister destroyed with black acrylic paint
Sometimes I get pretty nast...
07-21-2020
08:23 AM - BigJim quoted Tony B in post Beveled Laminate bit
I guess I need to re-visit ...
07-17-2020
08:36 AM - shoot summ quoted Tony B in post Bosch 1617EVSPK
Manufactureres change CEO's...
07-13-2020
11:25 PM - baserock love quoted Tony B in post Setting Up A New Shop
You are welcome anytime in ...
07-12-2020
05:42 PM - Dylan JC Buffum quoted Tony B in post Jig for large tenon cut
Not having a table saw to d...
07-11-2020
08:24 PM - hoowasat quoted Tony B in post First table
Great design. Very Original...
07-10-2020
08:43 PM - Echo415 quoted Tony B in post Air Compressor
It will be more or less sta...
07-09-2020
05:37 PM - TomCT2 quoted Tony B in post Joist Spans for Gantry
OK, so what size lumber sho...
07-08-2020
12:44 AM - BigJim quoted Tony B in post Anyone ever built their own coffin?
There is always the Pyrotec...
07-07-2020
01:17 PM - _Ogre quoted Tony B in post I need some help getting this shop presentable.
My solution would be to emp...
06-27-2020
10:39 AM - Tool Agnostic quoted Tony B in post Introduction and question
Maybe it's a Morse Taper #1...
06-26-2020
02:10 PM - redline9k quoted Tony B in post deconstruct an old door stile
Here are 2 other choices. ...
06-25-2020
05:01 PM - furnacefighter15 quoted Tony B in post How to proceed?
This post is almost 3 years...
 
For the best viewing experience please update your browser to Google Chrome