Woodworking Talk - Woodworkers Forum - View Profile: Taylormade

Taylormade Taylormade is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 10 of 10
  1. Blewis0888
    01-02-2014 07:09 PM - permalink
    Blewis0888
    Cool. Sorry for your buddy though. I plan on using the same type of reminder. Couldn't be simpler. Thanks.
  2. Blewis0888
    01-02-2014 06:12 PM - permalink
    Blewis0888
    Just saw your miter saw pic on the SCMS advice post. Noticed the Fender sticker on the side of your Milwaukee. Is this a safety reminder for each time you use the saw? Brilliant if so. Rock on.
  3. Mojorizin
    07-26-2012 03:13 AM - permalink
    Mojorizin
    Exactly, would like to get it back to factory he routed out all three spots where the pickups sit instead of three individual routed holes there is one big square. The pick guard does cover it when it is all together but there's 5 pickup slots cut in the pick guard he put in the standard three an added two humbucker. And the other thing is paint really isn't to much of a problem all the work needed to be done would be under pick guard not visible. So I guess all I had to say was yes I'd like to get it as close to factory as possible lol. If you want might be easier to talk on phone kind of hard to explain things n text so if you want talk or have any other questions my cell is 813-843-4529 my name is mike thanks for listening hope you can help. Mike. An like I said I'm in Brandon off 301 near crosstown (Leroy selmon)
  4. Mojorizin
    07-23-2012 01:14 PM - permalink
    Mojorizin
    Hey tm I was surfing around looking for some advise on guitar repairs if it's even possible. That strat you built was very impressive to say the least. I'm from Tampa area an problem is I traded a car for a strat few years ago didn't realize at the time nor did he that it was a 1971 with a maple neck very rare an it's the antique white also couldn't figure out what year until recent because I didn't want to take the neck off to check. I finally did an saw it was a 71. Here's The problem when I took off pick guard someone prior to me didn't know what they had an routered out the pickup area to soup it up an add more pickups i guess,I was sick when I saw this. . So bottom line is wondering IF it can be repaired I would really like to have it done I want to hang on to it not selling it. The neck alone is worth twice what the car was. So if you have any ideas or if you could point me in right direction that would be awesome. Thanks mojo
  5. adeptr
    03-04-2012 09:06 PM - permalink
    adeptr
    Thats another thing too. I'm an avid golf nut in the summer. We don't get to play year round up here in the North (probably a good thing). We'll be out there in three of four more weeks though! Thanks for your comment about the boxes, I appreciate it. Just sold one of my favorites today on the Etsy site. In fact its the one I showed you earlier after you had me change the hinge locations .....it's one of my favorites and I hate to let it go (almost, he, he)

    This is the one in case you don't remember: http://www.etsy.com/transaction/74570699
  6. adeptr
    03-02-2012 01:20 PM - permalink
    adeptr
    Man we got a lot in common! I also love college football, used to play guitar and sing in my younger days, love woodworking and.......of course, the beer. Thanks for your comments....you've helped me improve my work. Thanks
  7. adeptr
    01-30-2012 09:56 AM - permalink
    adeptr
    I took your advice on the newest posting of one of my boxes at: http://www.etsy.com/listing/91732484...k-keepsake-box - How does this look to you? I think I got it right this time.
  8. adeptr
    01-24-2012 09:34 PM - permalink
    adeptr
    Actually the hinges that I DID use were purchased at Menard's and were roughly the price you indicated. Are you saying that I could have used those same hinges but mortised them to the inside edges of the box and that is all I needed to do to make them more attractive and more highly desireable?
  9. adeptr
    01-22-2012 09:58 AM - permalink
    adeptr
    You're right about the hinges. I thought about that right after installing the el-chepos that I put on them. Additional boxes down the road will probably get 90 stop hinges installed. Thanks for the comment.
  10. Bill Wyko
    03-12-2011 02:19 PM - permalink
    Bill Wyko
    Sorry for the delay, I'll get you out a few sticks to enjoy. Have a great weekend.

  About Me

  • About Taylormade
    Location
    Tampa, FL
    Interests
    Guitar, singing, surfing, wakeboarding, college football, MLB baseball, home improvements annn beer.
    Occupation
    IT Manager
  • Signature
    Ut Prosim

  Statistics

Total Posts
Albums
Visitor Messages
Total Thanks
General Information
  • Last Activity: 10-08-2015 11:21 AM
  • Join Date: 02-03-2011

  Friends

Showing Friends 1 to 1 of 1
  • woodnthings
    • woodnthings is offline

  Mentions

No results to display...

  Quotes

No results to display...
 
For the best viewing experience please update your browser to Google Chrome