Woodworking Talk - Woodworkers Forum - View Profile: sgttruck21

sgttruck21 sgttruck21 is offline

Junior Member

  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. sgttruck21
    12-02-2019 10:45 AM - permalink
    sgttruck21
    I have and they cannot/will not provide any advice on the topic. All they say is that they don't recommend using a VFD with their saws. :/
  2. Catpower
    11-21-2019 02:48 PM - permalink
    Catpower
    It should work okay look at the schematic and make sure to hook up the electronics on the L1&L2 from the single phase


    I would call Saw Stop and ask them too, just to make sure
  3. Catpower
    10-17-2019 01:03 PM - permalink
    Catpower
    There are a bunch of VFDs that would work, I have had good luck with TECO/Westinghouse I get them at Factorymation on line, you power them up with single phase and they create the third leg for three phase


    Well I just checked for a model number and see thye have switched to WEG, they are also good, and Factorymation has good support so if you have any problems you can call them


    I have worked on VFD's for a long time the first ones used vacuum tubes for diodes, but they have made them much smaller and more reliable and affordable


    Here is one that would work fine on your saw:https://www.factorymation.com/CFW300B10P0B2DB20


    Hope this helps, Rick

  Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 02-18-2020 11:17 AM
  • Join Date: 10-16-2019

  Mentions

No results to display...

  Quotes

No results to display...
 
For the best viewing experience please update your browser to Google Chrome