Woodworking Talk - Woodworkers Forum - View Profile: Rick Christopherson

Rick Christopherson Rick Christopherson is online now

Member

  Statistics

Total Posts
General Information
  • Last Activity: Today 07:57 PM
  • Join Date: 06-27-2016

  Mentions

01-27-2020
03:44 PM - Tony B mentioned Rick Christopherson in post Veneer Vacuum Question
Rick Christopherson is correct. I forgot...
01-01-2020
05:52 PM - Tool Agnostic mentioned Rick Christopherson in post Embedding nuts in to a wood workbench
...t information from Rick Christopherson! Thank you! In addi...

  Quotes

01-28-2020
11:52 AM - GeorgeC quoted Rick Christopherson in post Windows-10 vs. Windows Anything
Having others not agree with you is not ...
11:18 AM - fareastern quoted Rick Christopherson in post Veneer Vacuum Question
I know this isn't what you asked, but if...
01-06-2020
06:33 PM - woodnthings quoted Rick Christopherson in post What are you suggesting...?
Hey woodnthings, you're slipping. :vs_OM...
01-03-2020
07:17 AM - DrRobert quoted Rick Christopherson in post Wood wants to lift when beginning a cut on table saw
Good point. I just took a closer look at...
01-02-2020
07:09 PM - woodnthings quoted Rick Christopherson in post Cutting plywood is NOT ripping!
I disagree. While this blade is very poo...
06:59 PM - woodnthings quoted Rick Christopherson in post OK, the consensus is ......
Or it's a very dull blade. Raise it up ...
06:13 PM - Dudley Wong quoted Rick Christopherson in post Wood wants to lift when beginning a cut on table saw
Are you sure that's the same blade? The ...
12:55 AM - SEMIJim quoted Rick Christopherson in post Embedding nuts in to a wood workbench
Just as a followup, this is the style th...
12:04 AM - Greengas quoted Rick Christopherson in post Shop Upgrade - Step 1
I'm not making a recommendation, because...
01-01-2020
06:38 PM - terryh quoted Rick Christopherson in post Embedding nuts in to a wood workbench
No, not if properly installed........ ...
12-31-2019
08:30 PM - woodnthings quoted Rick Christopherson in post Questions VS Reviews ....
No, you're in the right place. The revie...
05:53 PM - woodnthings quoted Rick Christopherson in post Like I said in post no. 2 ......
Possibly you got the blade on backwards ...
12-17-2019
01:20 AM - Microscopes quoted Rick Christopherson in post Minimizing lines in laminations
You did a great job of bookmatching the ...
08-16-2016
02:44 PM - TomCT2 quoted Rick Christopherson in post Wiring a 120/240 motor to 240v, examined in detail.
You're fairly close here, but there's on...
09:14 AM - GeorgeC quoted Rick Christopherson in post Odd plug on table saw
Woodnthings, I started writing this off-...
08-15-2016
10:26 PM - shoot summ quoted Rick Christopherson in post Odd plug on table saw
Explain to me again what you think is ha...
09:58 PM - Steve Neul quoted Rick Christopherson in post Odd plug on table saw
So, a well known electrical engineer tel...
07:54 AM - Steve Neul quoted Rick Christopherson in post Odd plug on table saw
Unfortunately you were misinformed, but ...
08-13-2016
06:52 AM - Steve Neul quoted Rick Christopherson in post Odd plug on table saw
I am sorry Steve, but you are incorrect ...
06-27-2016
11:20 PM - S Neul quoted Rick Christopherson in post VFD for 3 phase 5hp motor
You are confusing shapers and router tab...
 
For the best viewing experience please update your browser to Google Chrome