Woodworking Talk - Woodworkers Forum - View Profile: Kenbo

Kenbo Kenbo is offline

HALL OF FAMER

  Visitor Messages

Showing Visitor Messages 1 to 10 of 49
  1. Austin Adair
    06-06-2018 08:20 AM - permalink
    Austin Adair
    Hey Kenbo I know it's been awhile since you created THIS/ post about inlaid dovetails but, I had a quick question. In the beginning of your post you talk about needing to add a shim to compensate for the 8 degree dovetail cutter, and you say the formula is; the shim size x 1.15. Is there anyway you can help explain how you came up with 1.15 as the multiplier?

    I really love the amount of work you put into this post and I plan on knocking out a bunch of drawers using your technique. The only thing I had a hard time wrapping my head around is how you came up with that multiplier. Thanks!
  2. GEMcooter#2
    03-22-2017 04:44 PM - permalink
    GEMcooter#2
    Kenbo Good to hear you are doing well after the heart work. I didn't know about it. Take dare and hope you keepimproving
  3. smithbrother
    12-18-2015 09:28 AM - permalink
    smithbrother
    Kenbo, trust you are doing well, and ready for some Holiday fun.

    We are fine, staying home for Christmas. Our two adult children and their families will be here for Christmas, they live nearby so we see them often.

    I peek in to the site now and then, see you haven't started a new thread either. I'm still building my 1927, 30" race car model, and track section, fun project.

    Merry Christmas, Happy Holidays Kenbo,

    Dale Smith, in Indy
  4. smithbrother
    11-02-2015 03:30 PM - permalink
    smithbrother
    YOU did GOOD.

    I'm over 400 hours in my latest large model, expect approx. at least another 400 B4,finished.

    Trust all is well with you,and family.

    Dale Smith in Indy
  5. smithbrother
    09-11-2015 11:22 AM - permalink
    smithbrother
    Trust you are feeling well, your WORK is soooooooo nice,

    I'm 150 hours into a race car build, and section of the track. I expect at least 500 hours to go, but HAVIN FUN.

    Wishing you and family well,

    Dale L. Smith
  6. gmcooter
    03-22-2015 10:05 PM - permalink
    gmcooter
    I will try to post pictures. I can take the pictures but my daughter has to put them in the computer for me.gmcooter
  7. Veritas Innovations
    10-12-2014 01:03 AM - permalink
    Veritas Innovations
    Really nice work. I appreciate the craftsmanship and attentionto detail. I put a post of some of my work on here looking for solid criticism if you wouldnt mind..... If you cant find the thread my site is http://veritasinnovations.com/collections/all
  8. Donko
    08-20-2014 12:49 AM - permalink
    Donko
    Hi kenbe,
    Thank you for your response. I'll look for a scheme hour (plan) on the Internet. But I thought, maybe I'm wrong, if I find out first gear alter, I'll be able to find your images and other alter, gears. That would be the fastest way to get to the scheme hour. So I'll have to wait for my author, Dr. Clayton Boyer, send the plan.
    Regards,
    Donko
  9. Donko
    08-19-2014 10:24 AM - permalink
    Donko
    Dear Sirs,
    I'm from a Croatian from Zagreb, and I have several hobbies. Lately I've been cutting wood in various forms. I made you "scroll saw," according to the instructions from the internet and I cut a little bit. Looking for information for making a wooden clock I came across a website http://www.woodworkingtalk.com/ where I saw your article that I liked. I decided to make such a clock. From your picture you can see how the watch is made, and can be read and characteristics of gears. The only thing I am interested in the dimensions of the main gear so you pray if you can tell me the size of the gears. The image is on http://www.woodworkingtalk.com/f13/w...-28063/index2/ and contains seven (7) gear.
    Thank you and best regards to data from Croatian
    Donko,
    [email protected]
  10. Donko
    08-19-2014 10:15 AM - permalink
    Donko
    Dear Sirs,
    I'm from a Croatian from Zagreb, and I have several hobbies. Lately I've been cutting wood in various forms. I made you "scroll saw," according to the instructions from the internet and I cut a little bit. Looking for information for making a wooden clock I came across a website http://www.woodworkingtalk.com/ where I saw your article that I liked. I decided to make such a clock. From your picture you can see how the watch is made, and can be read and characteristics of gears. The only thing I am interested in the dimensions of the main gear so you pray if you can tell me the size of the gears. The image is on http://www.woodworkingtalk.com/f13/w...-28063/index2/ and contains seven (7) gear.
    Thank you and best regards to data from Croatian,
    Donko

  About Me

  Statistics

Total Posts
Albums
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 07:13 AM
  • Join Date: 09-15-2008

  Friends

Showing Friends 1 to 10 of 23
  • 4givndude
    • 4givndude is offline
  • Anguspapa
    • Anguspapa is offline
  • ben arnott
    • ben arnott is offline
  • btyirin
    • btyirin is offline
  • Cedar fly
    • Cedar fly is offline
  • cody.sheridan-2008
    • cody.sheridan-2008 is offline
  • firemedic
    • firemedic is offline
  • Heath
    • Heath is offline
  • JMartel
    • JMartel is offline
  • johnnie52
    • johnnie52 is offline

  Mentions

06-08-2019
09:16 PM - GreyhoundGuy mentioned Kenbo in post Another model build
Kenbo, I may have missed i...
04-23-2019
10:25 AM - nek.93 mentioned Kenbo in post Another model build
Kenbo are you building tra...
07-16-2018
05:56 PM - difalkner mentioned Kenbo in post Howdy from So. Cal.
...when you're ready. Kenbo is a very good scrol...
06-04-2018
08:36 AM - Austin Adair mentioned Kenbo in post Leigh jig-Inlaid dovetail tutorial
Hey Kenbo I know it's been awh...
06-02-2018
03:14 AM - faith michel mentioned Kenbo in post Simple Table Project
Good job... Kenbo i like it... Lenovo...
01-22-2018
12:44 PM - bwhite220 mentioned Kenbo in post Dinghy build
... Incredible work, Kenbo! Absolutely stunnin...
11:04 AM - difalkner mentioned Kenbo in post Scroll saw research
Get with Kenbo - he's a master at t...
11-21-2016
03:56 PM - goXtreme mentioned Kenbo in post Picture frames routing and clamping
...me+clamps Thanks to Kenbo for this one. There ...
06-30-2016
10:17 PM - Mort mentioned Kenbo in post Best NEW table saw
...uestion, our member Kenbo has a video on his u...
06-19-2016
10:11 AM - craigwbryant mentioned Kenbo in post What did you do today?
...til watching one of Kenbo videos on his youtub...

  Quotes

08-03-2019
09:59 AM - Bob in St. Louis quoted Kenbo in post On This Week's Show...
It is definitely an expens...
07-21-2019
01:52 PM - Tony B quoted Kenbo in post Hot Glue Guns
I have this one and the ba...
07-04-2019
08:44 AM - below_the_salt quoted Kenbo in post Another model build
Well the freight car got s...
06-14-2019
06:44 PM - faith michel quoted Kenbo in post Another model build
...ow.. You can do it Kenbo.. You are so talent ...
05-30-2019
07:52 AM - gj13us quoted Kenbo in post Another model build
For one reason or another,...
05-12-2019
11:21 AM - Mikhail2400 quoted Kenbo in post Another model build
I keep all of the models a...
04-23-2019
09:29 AM - BigJim quoted Kenbo in post Another model build
You are talking about this...
01-30-2019
10:17 PM - Mikhail2400 quoted Kenbo in post My latest scroll work.
Thanks for the kind words ...
01-16-2019
05:36 PM - AmishElectricCo quoted Kenbo in post Nothing special
My planer and sander (the ...
01:06 PM - mjadams61 quoted Kenbo in post Nothing special
Sorry for the delayed repl...
11-18-2018
07:49 AM - mtairymd quoted Kenbo in post Snake Puzzle
Love this. I might have t...
07-20-2018
10:39 AM - gweigert quoted Kenbo in post Wooden marble elevator toy!
...t's impressive. Hi Kenbo. No plans or instruc...
04-15-2018
09:53 PM - Toolman50 quoted Kenbo in post New scale model build January 2018
There are 1050 of them. I...
12:45 PM - Toolman50 quoted Kenbo in post New scale model build January 2018
Then it's sanding each one...
04-14-2018
09:13 PM - BigJim quoted Kenbo in post New scale model build January 2018
Spent another 8 hours in t...
03-31-2018
02:06 AM - Tennessee Tim quoted Kenbo in post Not quite...BUT almost!!!
Oh my. Now that's some se...
03-30-2018
12:18 PM - allpurpose quoted Kenbo in post Not quite...BUT almost!!!
Oh my. Now that's some se...
03-20-2018
02:47 AM - reppo.annaliisa quoted Kenbo in post woodworking video
.... Good luck. Hi Kenbo Thank you for the...
03-19-2018
03:35 PM - woodnthings quoted Kenbo in post I have referred to this type of post as stealth spam
I would like to think that...
03-14-2018
09:05 AM - Tool Agnostic quoted Kenbo in post Ted's Plans Warning
Just so that you guys are ...
 
For the best viewing experience please update your browser to Google Chrome