Woodworking Talk - Woodworkers Forum - View Profile: B Coll

B Coll B Coll is offline

Senior Member

  Statistics

Total Posts
Albums
Total Thanks
General Information
  • Last Activity: 08-07-2020 09:10 PM
  • Join Date: 11-01-2019

  Mentions

No results to display...

  Quotes

08-06-2020
11:30 PM - TommyBoyWA quoted B Coll in post Safe Crosscut?
Make yourself a crosscut sl...
07-12-2020
08:42 PM - Ryan Pfeifer quoted B Coll in post advice on stain for douglas fir
That grade of fir will tend...
07-08-2020
09:49 AM - woodnthings quoted B Coll in post My favorite way .......
Over the years I have cut m...
07-02-2020
11:19 AM - Rebelwork quoted B Coll in post What do you do with all the sawdust?
I used to give it to horse ...
06-25-2020
10:51 PM - RepairmanJack quoted B Coll in post 220 power & plugs on machines
I ran 220/30 amp in my shop...
06-13-2020
10:54 AM - Rebelwork quoted B Coll in post brad nailer
Think about what you are go...
06-12-2020
12:31 PM - BNB187 quoted B Coll in post Argghhh.. can't get HVLP gun to spray oil primer properly...
I have the same Fuji gun an...
06-06-2020
09:49 PM - RNrunner quoted B Coll in post Primer on raw wood
My "go to" primer, for inte...
06-04-2020
03:56 PM - RNrunner quoted B Coll in post Primer on raw wood
My "go to" primer, for inte...
05-26-2020
07:19 AM - Tony B quoted B Coll in post Shelf finish for plastic models
..................... I wou...
05-25-2020
08:54 AM - Rebelwork quoted B Coll in post Orbital sand paper question
I few years back I switched...
05-14-2020
09:36 PM - Rebelwork quoted B Coll in post Lookin' for a tape measure
Tape measures, by their nat...
05-13-2020
11:13 AM - BPoland quoted B Coll in post Bandsaw Blade Question
I use Timberwolf blades exc...
05-05-2020
10:44 PM - RNrunner quoted B Coll in post Can this be fixed? Damage to raw wood surface...
I think you have to decide ...
04-25-2020
07:37 PM - misterawesome quoted B Coll in post Paint/Clearcoat for Bathroom Project?
Surface prep is important. ...
04-04-2020
11:14 PM - jchester404 quoted B Coll in post Bookshelf - advice on assembly
I would do the shelves with...
01-31-2020
09:51 PM - Bill4807 quoted B Coll in post Lines from jointer on edge
If your knives are hss, the...
01-28-2020
01:57 AM - WeebyWoodWorker quoted B Coll in post How do you think I should glue this?
I would run a cut down the ...
01-01-2020
11:01 PM - Greengas quoted B Coll in post Shop Upgrade - Step 1
What do you plan on doing i...
12-29-2019
07:42 AM - GeorgeC quoted B Coll in post Rookie needs tips/guidance...
I like to cut my miters a s...
 
For the best viewing experience please update your browser to Google Chrome