Woodworking Talk banner

Media added by thegrgyle

Navigation

Browse albums
A pic of it installed with the backboard. I can adjust the height of the rim by simply unscrewing the knobs, and raising/lowering it, and then tighte

A pic of it installed with the backboard. I can adjust the height of the rim by simply unscrewing the knobs, and raising/lowering it, and then tighte

  • 0
  • 0
A pic of it installed with the backboard. It is plenty strong.... I weigh 275 lbs, and I can do a chin-up on it.

A pic of it installed with the backboard. It is plenty strong.... I weigh 275 lbs, and I can do a chin-up on it.

  • 0
  • 0
a pic of the wedged tennons after they were trimmed and sanded flush.

a pic of the wedged tennons after they were trimmed and sanded flush.

  • 0
  • 0
completed ready for paint.

completed ready for paint.

  • 0
  • 0
Completed ready for paint

Completed ready for paint

  • 0
  • 0
A pic of the thru tennon, with the slot for the wedge to be inserted. This was a dry fit.

A pic of the thru tennon, with the slot for the wedge to be inserted. This was a dry fit.

  • 0
  • 0
I had to make a shallow dado in the side to accept the backboard. It also had to be angled, so I cut a thin piece of wood to raise the base on my rou

I had to make a shallow dado in the side to accept the backboard. It also had to be angled, so I cut a thin piece of wood to raise the base on my rou

  • 0
  • 0
Here, I am marking for the tennons that will be cut into the ring.

Here, I am marking for the tennons that will be cut into the ring.

  • 0
  • 0
The finished ring, after flattening with a router sled.

The finished ring, after flattening with a router sled.

  • 0
  • 0
this is a close up of how the band clamp has a "caul" in it to make sure the joint is held tight.

this is a close up of how the band clamp has a "caul" in it to make sure the joint is held tight.

  • 0
  • 0
Here, I'm glueing what I think is the 4th 1/8" strip to the others, as it is bent around the form. I am using TB3 since it will be an outdoor pr

Here, I'm glueing what I think is the 4th 1/8" strip to the others, as it is bent around the form. I am using TB3 since it will be an outdoor pr

  • 0
  • 0
This is the broken rim.

This is the broken rim.

  • 0
  • 0
An 8 foot tall Red Solo Cup made out of Cardboard..... for a charity Boat race More info here: http://www.woodworkingtalk.com/f15/red-solo-cup-part

An 8 foot tall Red Solo Cup made out of Cardboard..... for a charity Boat race More info here: http://www.woodworkingtalk.com/f15/red-solo-cup-part

  • 0
  • 0
The cup mounted on the Pontoon boat, in my brothers driveway. More info here: http://www.woodworkingtalk.com/f15/red-solo-cup-part-2-a-40209/

The cup mounted on the Pontoon boat, in my brothers driveway. More info here: http://www.woodworkingtalk.com/f15/red-solo-cup-part-2-a-40209/

  • 0
  • 0
The cup ready for delivery to the beach for the big race. More info here: http://www.woodworkingtalk.com/f15/red-solo-cup-part-2-a-40209/

The cup ready for delivery to the beach for the big race. More info here: http://www.woodworkingtalk.com/f15/red-solo-cup-part-2-a-40209/

  • 0
  • 0
This was the second time I tried my dovetail jig to make some half blind dovetails..... I thought they turned out pretty good, but realized that the

This was the second time I tried my dovetail jig to make some half blind dovetails..... I thought they turned out pretty good, but realized that the

  • 0
  • 0
Here are the drawers installed in the space where the doors used to be. I thought I found a decent match, stain-wise, though it is not perfect. I tr

Here are the drawers installed in the space where the doors used to be. I thought I found a decent match, stain-wise, though it is not perfect. I tr

  • 0
  • 0
my wife found the Armoire at a garage sale, for my daughter. Behind the doors there was an area that you could hang clothes... My 7 year old daughter

my wife found the Armoire at a garage sale, for my daughter. Behind the doors there was an area that you could hang clothes... My 7 year old daughter

  • 0
  • 0
My version of tip storage protection. Its just some sliding dovetails, and the braces can be stored in the drawers when the saw is not in use. It wo

My version of tip storage protection. Its just some sliding dovetails, and the braces can be stored in the drawers when the saw is not in use. It wo

  • 0
  • 0
A picture of the large drawer, big enough to hold his fence.

A picture of the large drawer, big enough to hold his fence.

  • 0
  • 0
This picture shows the blade storage drawer.... It should hold up to 8 blades or so.

This picture shows the blade storage drawer.... It should hold up to 8 blades or so.

  • 0
  • 0
This is what I came up with for my buddy's tablesaw. It has a dust collection tray that hooks up to a shop vac, and storage for any accessories that

This is what I came up with for my buddy's tablesaw. It has a dust collection tray that hooks up to a shop vac, and storage for any accessories that

  • 0
  • 0
My buddy had this tablesaw that came with a real rickety base, and asked if I could build something to make it more stable, and maybe improve the dust

My buddy had this tablesaw that came with a real rickety base, and asked if I could build something to make it more stable, and maybe improve the dust

  • 0
  • 0
This is a door that I made to replace one that my friend broke on his dresser..... Their is a pic of the broken door it replaced in this album somewhe

This is a door that I made to replace one that my friend broke on his dresser..... Their is a pic of the broken door it replaced in this album somewhe

  • 0
  • 0
My friend stumbled into his dresser door and broke it, as you can see... He asked me if I could repair/remake one for him. After looking at it and th

My friend stumbled into his dresser door and broke it, as you can see... He asked me if I could repair/remake one for him. After looking at it and th

  • 0
  • 0
Top