Woodworking Talk banner

Media added by bobby769

Navigation

Browse albums
Here's the completed workbench. The top part is 2 peices (for extra rigidity) of 3/4" plywood. In planning sages I thought that might have been t

Here's the completed workbench. The top part is 2 peices (for extra rigidity) of 3/4" plywood. In planning sages I thought that might have been t

  • 0
  • 0
This is the complete frame. Note the notch in the foreground. The first notch was too narrow to fit the 2x3 cross peice and I had a hard time getting

This is the complete frame. Note the notch in the foreground. The first notch was too narrow to fit the 2x3 cross peice and I had a hard time getting

  • 0
  • 0
You can see that my routing skills need some work. The 1x2 that's nailed to the 2x4s acts as a guide for the router base. The notch was made in 3 pass

You can see that my routing skills need some work. The 1x2 that's nailed to the 2x4s acts as a guide for the router base. The notch was made in 3 pass

  • 0
  • 0
Workbench was designed using Google Sketchup. Middle section will hold Chop saw. Bottom platform will be covered in 1/2" Plywood. Shelves will be

Workbench was designed using Google Sketchup. Middle section will hold Chop saw. Bottom platform will be covered in 1/2" Plywood. Shelves will be

  • 0
  • 0
Top