For cutting stock such as for picture frames I use a miter bar which has no slop in the groove. Add a long fence with sand paper stuck to it (so stock

With this jig you do not have to angle your saw. This is home made about seven years ago. During assy leave main angle parts a little loose held toget

You will need a stop block with a 45 degree end to cut same length pieces. I never move this miter guage angle it is saved for the 45,s only. If the e

For cutting stock such as for picture frames I use a miter bar which has no slop in the groove. Add a long fence with sand paper stuck to it (so stock

This shows how you can cut exact same length sides and also the hold down arm.

I still have a little adjustment as you can see with the bolt w/ wing nut. The base has a small slot for this but I have not , moved it in years.

For cutting stock such as for picture frames I use a miter bar which has no slop in the groove. Add a long fence with sand paper stuck to it (so stock

vhuffines
Aug 4, 2011

Watch Add bookmark

There are no comments to display.