Woodworking Talk banner
Add bookmark
IMG 9717

IMG 9717

  • 0
  • 0
IMG 9716

IMG 9716

  • 0
  • 1
IMG 9715

IMG 9715

  • 0
  • 0
IMG 9714

IMG 9714

  • 0
  • 0
motorcycle cutting

motorcycle cutting

  • 0
  • 0
Another scrolling piece in a walnut frame. Really enjoyed this one.

Another scrolling piece in a walnut frame. Really enjoyed this one.

  • 0
  • 0
Just a fantastic and fun project, from start to finish. From making my own plywood out of walnut and maple to the cutting and balancing of the gears,

Just a fantastic and fun project, from start to finish. From making my own plywood out of walnut and maple to the cutting and balancing of the gears,

  • 0
  • 1
15 hour cutting in a custom walnut frame with maple splines.

15 hour cutting in a custom walnut frame with maple splines.

  • 0
  • 0
rough dimensions of this bike are 22"X12" high. Made of oak, maple, poplar, pine, spruce.

rough dimensions of this bike are 22"X12" high. Made of oak, maple, poplar, pine, spruce.

  • 0
  • 0
rough dimensions of this bike are 22"X12" high. Made of oak, maple, poplar, pine, spruce.

rough dimensions of this bike are 22"X12" high. Made of oak, maple, poplar, pine, spruce.

  • 0
  • 0
rough dimensions of this bike are 22"X12" high. Made of oak, maple, poplar, pine, spruce.

rough dimensions of this bike are 22"X12" high. Made of oak, maple, poplar, pine, spruce.

  • 0
  • 0
A turtle I made for Mrs. Kenbo. Shell is olive wood and the body is maple.

A turtle I made for Mrs. Kenbo. Shell is olive wood and the body is maple.

  • 0
  • 0
An oak and poplar box that I made for my wife.

An oak and poplar box that I made for my wife.

  • 0
  • 1
A replica of the Big Ben clock tower designed by Dirk Boelman

A replica of the Big Ben clock tower designed by Dirk Boelman

  • 0
  • 0
A big thanks goes out to CRANBROOK2 for his assistance in the building of this 12 family birdhouse. Thanks John.

A big thanks goes out to CRANBROOK2 for his assistance in the building of this 12 family birdhouse. Thanks John.

  • 0
  • 0
A small hammerhead shark intarsia piece. This one was a fun one to make. Found the pattern in a magazine and thought it was a good one. Made of oak

A small hammerhead shark intarsia piece. This one was a fun one to make. Found the pattern in a magazine and thought it was a good one. Made of oak

  • 0
  • 0
A small hammerhead shark intarsia piece. This one was a fun one to make. Found the pattern in a magazine and thought it was a good one. Made of oak

A small hammerhead shark intarsia piece. This one was a fun one to make. Found the pattern in a magazine and thought it was a good one. Made of oak

  • 0
  • 0
Flocked the inside of the box, just to finish it off.

Flocked the inside of the box, just to finish it off.

  • 0
  • 1
A view of the hinges.

A view of the hinges.

  • 0
  • 0
A tea light candle storage box that I made for Mrs. Kenbo. Constructed using finger joints and wooden hardware.

A tea light candle storage box that I made for Mrs. Kenbo. Constructed using finger joints and wooden hardware.

  • 0
  • 0
The base of this project was made for me by my grandfather approximately 30 years ago. (1980) The top was made by me to compliment my grandfathers ha

The base of this project was made for me by my grandfather approximately 30 years ago. (1980) The top was made by me to compliment my grandfathers ha

  • 0
  • 0
The base of this project was made for me by my grandfather approximately 30 years ago. (1980) The top was made by me to compliment my grandfathers ha

The base of this project was made for me by my grandfather approximately 30 years ago. (1980) The top was made by me to compliment my grandfathers ha

  • 0
  • 0
Just over 10 1/2 hours of cutting. This one is quite fragile with the piece bending under its own weight. The frame is a simple 2" wide frame w

Just over 10 1/2 hours of cutting. This one is quite fragile with the piece bending under its own weight. The frame is a simple 2" wide frame w

  • 0
  • 1
Just over 1500 interior cuts and over 16 hours of cutting. A lot of fun was had cutting this one. The frame is a simple pine frame, with each piece

Just over 1500 interior cuts and over 16 hours of cutting. A lot of fun was had cutting this one. The frame is a simple pine frame, with each piece

  • 0
  • 1
Had a lot of fun with this one. Thanks to all who followed the step by step thread. You all made it more enjoyable.

Had a lot of fun with this one. Thanks to all who followed the step by step thread. You all made it more enjoyable.

  • 0
  • 0
Kenbo

Latest projects

A few of the latest projects.

Ken
Click to expand...
There are no comments to display.

Album information

Album owner
Kenbo
Date created
Item count
35
View count
18
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Kenbo

Kenbo

Media items
79
Albums
8
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top